It usually is only 3 or 2 phillips head screws, although you may have to move the air cleaner on some models (pop the cover off). Use the correct replacement bulb for your machine.
Simple !! just obtain a Ryobi fuel system repair kit (any Ryobi dealer ) , this includes a new primer button , unscrew two Phillips screws holding clamp ring down around bubble (save them) remove damaged bubble (all of it, sometimes leaves behind bits of it) install new bubble and verify it's down in groove , reinstall clamp ring and screws , fill fuel tank and prime button (pushing it )
310 views
Usually answered in minutes!
×