Presour switch?
SOURCE: LG Top Loader Fuzzy Logic 5.5. The water
Hi,
No you just need to get the drain hose up higher...the water is siphoning out and is either caused by the end of the drain hose still in water and not having an air gap or the hose is not going up higher then the top of your washer...
Lifting the hose up should give you an air gap and get the hose high enough to stop the siphoning...
heatman101
Testimonial: "I am extremely impressed that this won't cost a call out service fee. . . and looking like a bimbo. thanks, heatman!"
SOURCE: I have an LG Fuzzy Logic top loader. it keeps draining water out
If it's really as you described, when draining at the same time filling up, then it's a problem in the main control board. You'll need some electronics knowledge to repair it, or just replace the main board
SOURCE: Bowl keeps slowly filling with water when turned off.
I think your water valve is bad , change it
SOURCE: LG 8kg Fuzzy logic top
Assuming the water is coming in even when unit is unplugged from wall. You should to replace the water inlet valves where the hoses connect to the machine. You need to unplug the power and remove the top, disconnect the hoses unhook the wire harness plugs, unscrew the hose valve hex nut and remove valve. Install the new one in reverse order.
SOURCE: how to start a LG fuzzy logic turbo drum washing
the water is going out during the wash? how to solve it ?
162 views
Usually answered in minutes!
×