Problem with vertical shaking from DVD player with standard cord.

The movie is Frozen..."non cartoon" DVDs don't have this issue. Is there a setting to be adjusted - other than energy saver settings...they are all turned off. The DVD player is a SONY video DVD combo - RMT-V501E - but again all other DVD's are fine...

5 Related Answers

thermonuclearcoldfusion

4 Answers
Posted on Jan 28, 2008

SOURCE: samsung dvd combo player.

sell me your unit!

Anonymous

236 Answers
Posted on May 04, 2008

SOURCE: DVD video player problem

your laser is getting weaker now, if you have thoroughly cleaned then it needs a replacement now.

Anonymous

7 Answers
Posted on Jan 01, 2009

SOURCE: Connection cord problem from VR375 to TV set?

Page 18 of the user manual for your device shows that there are normal video (yellow) and audio (red/white) connectors underneath the A/V out column of connectors - Since your son's TV does not have an HDMI cable (all you would need if that were the case) make sure you connect the A/V out column to the RCA type inputs of your son's TV.

The manual can be found here:

http://downloadcenter.samsung.com/content/UM/200802/20080229102004125_01613A-01-VR375-XAA-ENG-BM-0228.pdf

Anonymous

1 Answer
Posted on May 28, 2009

SOURCE: Can't switch from AV2 to AV1 with Samsung DVD-VR375 DVD Recorder / VCR Combo

To be able to select AV1, you have to first go into the setup menu and set the control set top box setting to OFF. I think you go to the menu >> setup >> features >> set top box control >> select OFF. Note that this has the side effect of erasing any previously stored timer settings.

Anonymous

1 Answer
Posted on Nov 24, 2009

SOURCE: I want the code to play Zone 2 DVDs on my DVD which is set for 4

1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show "no disc" at the top. Press the Info button again, and this will disappear. If the "no disc" does not disappear then try again by using the REPEAT button
6) Now type the code that applies for your region (R2 is 57538). A '2' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player

I've found the following codes at the 1080P7 hack:
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
This worked on my dvd1080p9 R2 DVD player

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

DVD player will not play a standard DVD after playing a Netflix movie

Could be a region setting issue. Go to DVD preferences and restore defaults. Try running your standard DVD from an outboard player and see if it works. Check your region setting- should be Region 1 for American DVDs. Any error messages?

Read full answer

Feb 16, 2015 • Apple MacBook Pro - Core Duo 2.16 GHz -...

0helpful

1answer

CC (closed caption) won't show up on DVD movies for LG 42CS570 hooked up with standard DVD player (not Blu-ray). How can I fix that?

Subtitle setting is in the dvd setting not the tv, If the DVD would have CC it would be on the case, CC is encoded in to the tv signal

Read full answer

Mar 01, 2014 • LG 37LP1D 37 in. LCD Television

1helpful

1answer

My pioneer dv-120k wont play australian or us cd's. Only home burnt copies of movies.

dvd players because of copyright info can only be set to one region code and can only play dvds from that region. Some players are set at factory some allow user to reset region usually a limited no. of times.
home burnrd dvds usually don't carry that info therefore no issue. So you need to reset player for appropriate region

Read full answer

Jan 12, 2014 • Pioneer DV120K Player

0helpful

3answers

I can't play a movie

What kind of console do you have?

And what kind of disc do you have?

If it's a PS3 it can play regular DVDs and BluRay discs.

If you have an XBOX 360 you should be able to play movies on DVDs or HD DVD.

If you have a Nintendo Wii then it can't play any kind of movie unless you unlock (mod) it. Use a guide to do that like this one.

Read full answer

Jun 03, 2011 • Video Game Consoles & Games

0helpful

1answer

My BD530 player doesn't play all movies clearly. Some come cover good others re all snowy

When properly connected to a High Definition display or TV, Blu-Ray Disks (BD) should play crystal clearly. Inserting an old "non-Blu-Ray" disk (or the original "DVD") in the Blu-Ray player will display a comparatively "fuzzy" picture. This is the difference between High Definition and Standard Definition. A "BD player" can not "upgrade" the picture quality on DVDs to that of a BD or High Definition picture.

Rent, purchase or choose Blu-Ray Disks (BD) whenever a choice is offered to view the High Definition version of a movie or video. Selecting the DVD version will provide the lower quality or Standard Definition version of the same movie or video.

Check the covers or disk itself to determine if the movie or video is in DVD or BD format. That will tell you what you can expect for picture quality.

I hope this helps & good luck! Please rate my reply - thank you.

Read full answer

Mar 17, 2011 • LG Super Blu BH200 Blu-ray and HD-DVD...

0helpful

2answers

Dvd DOES NOT PLAY MOVIES AND UNABLE TO LOAD GAME SOFTWARE

The standard version has Windows Vista® Home Basic Edition SP1. This version do not have native support for decoder to watch DVD movies. Install a good DVD player like WinDVD or any other DVD player software. This will install the necessary decoder. Once this is done even if the installed trial version expire, your windows media player will still play the movies. However, if you like the software, make it fully licensed version on-line. Hope this helps.

Read full answer

Feb 06, 2010 • Dell Inspiron 1545 Notebook

0helpful

2answers

Hi i have a sharp hp22 i ham trying to play normal dvds on it ? is that possible

In general, Blu-ray player is compatible with DVDs. So you can play DVD on Sharp Blu-ray Player. However, some pretected DVD can be played on Blu-ray Player. As for How to remove region restriction on DVD for playing on any Blu-ray player, just follow below steps.
Step 1. Download and install Leawo DVD Ripper on your computer, and then kick off the program to enter the main interface. Import the DVD with copy protection on your computer by clicking Add Blu-ray/DVD. Once the protected DVD is selected, you will be provided three options to import DVD file(s): Full Movie, Main Movie and Custom Mode. Full Movie is to import all titles, and Main Movie only imports the longest title by default. And you are able to choose titles for importing under Custom Mode.

Step 2. In a drop-down box named "MP4 Video", you can click "Change" to enter the Profile panel to select the output format.

Step 3. Set a directory under "Save to" box. Finally, hit "Convert" button at the bottom to start the conversion process. During the conversion process, Leawo Blu-ray Ripper will automatically remove the disc copy protection and then begin the conversion in several minutes. With Leawo DVD Ripper, it will help do Blu-ray players play all region DVDs.

import-source-dvd-files-into-program-3-fmmoq3ftxijl00hhi1dormrn-5-0.jpg

import-source-dvd-files-into-program-3-fmmoq3ftxijl00hhi1dormrn-5-0.jpg

For more details, check: How to remove region restriction on DVD for playing on any Blu-ray player

Read full answer

Dec 27, 2009 • Sharp BD-HP22U Player

6helpful

1answer

PS2 will not play DVDs

hEy i hAd the sAme pRob...............dOn wOrRy all u hAv to do is to turn on uR pS2 witthout puttin a DVD oR aNy diSc........on mEnu screen gOto [options] by pRessing 'triangle' button......... a new screen will appear select by pressing 'X' [DISC SPEED]....n sEt it to fAst.....then insert the DVD movie........tURn off PS2....press n hold the reset button till the blue light is turned on......release the button and press it again.............. it wOuld take a little tYm foR uR DVD movie to be loAded........be patient till the movie plays it self..............

Read full answer

Jun 13, 2009 • Sony PlayStation 2 (PS2) Console

1helpful

2answers

Zenith DVD Player--DVB410/ZND400

I got two new disks to-day with pictures taken from 35mm slides. They will not play on my zenith znd400 dvd player. I wonder why??????

Read full answer

May 10, 2008 • Zenith DVB412 DVD Player

1helpful

2answers

The DVD player does not recognize disks that it used to play before.

It sounds like the DVD region (a setting in both your OS and your DVD hardware) may have been changed. DVD regions are the agreed upon method (by entertainment companies, hardware manufacturers and governments) to limit cross-border sharing of media. Most valid (read: non-pirated) DVDs have a region code. Your DVD drive will only play DVDs with a region code that matches the DVD region code set on the DVD drive.

You didn't mention your OS but if you are running Windows XP then go to Start->Control Panel->System->System->Hardward->Device Manager and find your DVD player. Right-click the DVD player and select Properties from the menu and you should see a properties dialog-box with a DVD region tab. This is where you can change the DVD region that your player will recognize. Be careful, don't play around here, most DVD players have an embedded limit on the number of times (4-or-so) the DVD region can be changed.

Hope this helps.

-Ed

Read full answer

Mar 31, 2007 • NAD C541 CD Player

Not finding what you are looking for?

View Most Popular

UN50ES6100 50 Inch 1080p Smart TV LED LCD HDTV

Televison & Video

DVD player will not play a standard DVD after playing a Netflix movie

Apple MacBook Pro - Core Duo 2.16 GHz - RAM 1 GB - HDD 100 GB - DVD RW - Mobility Radeon X1600 - Gig... Notebook

108 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Samsung UN50ES6100 50 Inch 1080p Smart TV LED LCD HDTV? Or just drag it here!

Related Topics:

Problem with vertical shaking from DVD player with standard cord.