I need a belt diagram for a western auto Wizard Tiller model # gai2120a38 I recently bought it and it didn't have a belt and I don't know the size or how it goes back on

I am sure I answered this a few hours ago and change your text from 'Glison' to 'Gilson'.?? The company is still in business.

https://www.google.ca/search?q=gilson+gis6990a27+tiller+belt

..

hope this helps

First the belts are 200555 for wheel drive and 200554 for tine drive. Just check for Western Auto and those numbers you should find them on EBAY easily they are 3/8 x46 and 1/2 x46 if memory serves me.

I bought my tiller from Ward in 1977 or 1978 , here is the manual I share http://www.mediafire.com/view/?6fadkdi9d6l338j

Hi and welcome to FixYa, I am Kelly

Here is a picture of the belts installed.
http://photos.cubfest.com/albums/userpics/10231/Belt_Routing.jpg
NOTE the front fwd direction drive belt / closest to the motor is installed like any other belt. The rear belt for REVERSE direction has 1/2 twist. The idler pulley presses in for foward driving and pulls out against the reverse drive belt.

This should be what you need.

Thanks for choosing FixYa,
Kelly

I need more information like make, model, kind of motor, size tiller(12inch?), walk behind? but the following links may help you get a manual, http://www.hammerwall.com/Manuals http://www.ssbtractor.com
contact me if you need more help.

I think you can find it on amazon, take a look here: Amazon com Western Riding Mowers. Wish you best of luck.
Vince

If you are still looking for an answer, please reply in comments and I will tell you where to get a manual for free that has the belt routing and parts numbers J

looking for a forward belt for a Scott model 6070s tiller

Well I cannot find the size but I did find the part # and a place to order the part. Hope this helps
Kurt
Part # 754-0434
Can get from the following
http://www.buymtdonline.com/webapp/wcs/stores/servlet/Home_YardMachines_10101_19502_-1

I bought a repair manual from Clymer and found the belt sizes for my Atlas 12.5022 tiller. The manual lists a 1/2 inch by by 36 inch forward belt and 1/2 inch by 32 inch reverse belt for the model 12-5100. Good luck. Don't bother to buy the Clyme manual. It isn't very complete.

Bob Mortimer
[email protected]