At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fixya
https://www.fixya.com > Forum > Tags > jkexer e1
...jkexer polar 5090 treadmill and its coming up E1 any ideas please 1) You must adjut the speed sensor, clean it, tight the connector very well.see the ...
images
If the E1 error occurs after the belt starts to move for several seconds, the error code means that the system is not picking up the speed of the motor. This pickup comes from a magnet mounted on the front roller pulley and a speed sensor, or a problem with the magnet.Feb 29, 2016
Error code 35 on a Pacemaster Pro Elite treadmill typically indicates a problem with the treadmill's speed sensor. This sensor is responsible for detecting the speed at which the treadmill belt is moving and providing that information to the treadmill's control panel. If the speed sensor is not functioning properly, the treadmill may display error code 35 and stop operating.
There are a few things you can try to troubleshoot and fix this error:
Check the connections between the speed sensor and the control panel. Make sure that the connectors are securely plugged in and that there are no visible signs of damage.
Clean the speed sensor. The speed sensor may be dirty or covered in debris, which can affect its ability to accurately detect the treadmill's speed. Use a dry cloth to gently wipe away any dirt or debris.
Check the treadmill belt for proper tension. If the belt is too loose, it may cause the speed sensor to malfunction. Adjust the belt tension according to the manufacturer's instructions.
Replace the speed sensor. If none of the above steps fix the problem, the speed sensor may be faulty and need to be replaced. This is a more complex repair that may require the assistance of a professional.
I hope these suggestions help you resolve the error code 35 issue on your Pacemaster Pro Elite treadmill. If you are unable to fix the problem or if the error persists, it is recommended to contact the manufacturer for further assistance.
Error code E2 on a treadmill typically indicates a problem with the speed sensor. The speed sensor is a small device that measures the speed of the treadmill belt and sends a signal to the treadmill's control panel. If the sensor is not functioning properly, it can cause the treadmill to display an E2 error and prevent the belt from moving.
There are a few potential causes of an E2 error on a treadmill:
The speed sensor may be loose or misaligned. Make sure that the sensor is securely attached to the treadmill frame and properly aligned with the magnet on the flywheel.
The speed sensor wire may be damaged. Check the wire for any visible damage, such as fraying or cuts.
The control panel may be malfunctioning. If the error persists even after checking the sensor and wire, the control panel itself may be the issue. In this case, it may be necessary to have the treadmill serviced by a professional.
I hope this information is helpful. If you continue to experience problems with your treadmill, it is recommended to have it serviced by a professional to ensure that it is functioning safely and correctly.
Have to check the speed sensor. Either the speed sensor is faulty or the can be dust or speed sensor alignment.
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
hi, There are two possibilities for this problem 1. Check the speed sensor on near the motor pulley. Remove the sensor and clean it and re-fix it. then make a try. if problem remains then 2. The motor speed controller is faulty. There is an IGBT for controlling the motor speed. If it get shorted the motor will run it its high speed.
Be sure before opening the treadmill remove the power. ok
tHIS MAY BE A SPEED LOSS ERROR. Is the belt moving when this happens? Decribe what lead to this problem in the first place that will help me to better assist you.
×