How do I wire a infinity gold amp - Infinity Car Audio & Video

hi,

if thats a dodge this might be it..

Re: Infinity Gold AMP Wire Diagram



Well I don't particularly care for Haynes manuals, but my FSM's did not have anything either. I found this in thejeep cherokee haynes manual and it says that it is for 97 and later models but see if it is close. it looks like there are 2 harnesses so I will list them seperately:

Hartness 1:
[7] Left Soundbar Speaker (+) BR/YL
[8] Left Soundbar Speaker (-) BR/LB
[5] Left Front Door Spkr (+) DG
[1] Left Front Door Spkr (-) BR/RD
[9] Right Soundbar Speaker (+) DB/WT
[3] Right Soundbar Speaker (-) DB/OR
[6] Right Front Door Spkr (+) VT
[2] Right Front Door Spkr (-) DB/RD
[4] Power Amp Relay Feed DG/RD

Harness 2:
[05] Right Soundbar Spkr (+) TN/RD
[13] Right Soundbar Spkr (-) TN/BK
[06] Left Soundbar Spkr (+) WT/TN
[14] Left Soundbar Spkr (-) WT/BK
[11] Passenger Door Spkr (+) LB/RD
[10] Passenger Door Spkr (-) LB/BK
[04] Drivers Door Spkr (+) DG
[12] Drivers Door Spkr (-) LG/RD
[01] Power Amp Feed
[02] Power Amp Feed
[07] Power Amp Ground
[08] Power Amp Ground

The tweeters run in parallel off of the door speakers.... If I can help any more let me know.

-Mike.
https://forums.off-road.com/jeep-mid-sized/105694-infinity-gold-amp-wire-diagram.html

Did u check the fuses for radio and the amp itself, that's the most common thing when changing a radio or amp with a vehicle with an amp in it

Not sure if it's the same but I have a 99 grand, and the fuse is in the amp under the back seat on the passengers side

try a higher gauge of wire along with gold tips.... also make sure the amp / receiver is grounded

Most likely no. The parts for the amp and not easily obtained and some take special tools to repair.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

yes but make sure you connect the power wire of the amplifier and buy a converter for the amplifier so you can get great sound.

no, you have to ck each wire where it goes.

I have the file on my other computer - search other bulletin boards. Check with Crutchfield help desk.

Input wires are the speaker wires from the Amp head/receiver (so you can go to a BestBuy and ask them for the speaker wire colors). Black is ground. Yellow/black is main power. Blue/white is turn on wire. If in doubt take off the door panels and look at what color wires go to the speakers.

are the tweeters connected to a crossover?

I'd recommend a rockford fosgate 4 channel punch series. affordable, yet the quality is superd. i had a p450.4 run infinity kappa series seps in the front and a polk audio db691 ovals at the back. wired it up. it was LOUD. and the clarity was just amazing.

just buy an amp your better off