When trying to use the self timer, I'm finding that on the menu, but don't see any times

Press cursor-down (marked with a one-handed clock) to bring up the self-timer menu, use cursor-left/right to select the desired delay, then press the MENU/OK button. Start the self-timer by pressing the shutter release button as usual.

Full details are in the "Using the Self-Timer" section of the manual (page 39 in my copy). If you need a manual you may download a copy here.

The self timer is indicated on the display with a clock type indication. It is circular arrow with a central arrow inside the circular indicating the timer.
Find this out from the menu. most of the camera have it with button seperately that can be pressed to set off the presetted time. This time can be set accordingly ... to your spacing.
Check this out and trigger the timer to set the camera ticking to click.

Press the self-timer button to cycle through self-timer settings. The rectangle indicates normal shooting, the clock indicates self-timer. Depending on the shooting mode, you may also see overlapped rectangles for continuous shooting.

To change the delay time, select [Self-timer] from the Recording menu.

The self-timer button is the same as the down-arrow on the circular multi-selector, marked with a clock.

See page 53 of this manual.

the self timer usually works like this.
find the self timer setting and set it to 5 or 10 seconds.
then exit the menu and click the button that you normally press to take photo. the self timer will start automatically and the picture will be taken after 5 or 10 seconds (depending on what you set).
note that the self timer will be reset to off after this.

Hi:
I found the user manual for your Samsung S360 Camera. I cut and past the self timer part. Please follow them.

If you would like the whole user manual, please send your email. I will send it as attachment.

GOOD LUCK!!!!!!!!!!!!!!


Self-timer( ) / Right( ) button
When the menu is displayed on the LCD monitor, pressing the Right button makes
the cursor shift to the sub menu.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as
the Self-timer( ) button. This function is used when the photographer would also
like to be in the image.
Selecting the self-timer
1. Rotate the mode dial to the STILL IMAGE/ MOVIE CLIP
mode.
2. If the self-timer indicator is displayed on the LCD monitor by
pressing the self-timer button, the setting is completed.
3. Pressing the shutter button will allow an

GOOD LUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

To turn on go to MENU / Drive mode / Self-timer.
To set delay time go to MENU / Setup / Screen 4 / Self-timer. Can set to either 2 or 10 seconds.

it's realy easy: just press func. button, then press down 2 time, now you can find it: 10sec, 2sec and custom self timer. (foe setting custom mode highlight it and then press menu.) hope it can help you...

Here's how it works.

Press the Menu button. (Some settings are unavailable in some modes.)
Press 'up arrow' or 'down arrow' to get to the 'Self Timer' option which looks like a clock set at 10 minutes to 10.
Press the OK button.
Press the Menu button to exit the menu.
(This setting will stay until you take a picture or turn the mode dial).

Good Luck

It is in the Drive mode, the options are single shot, continuous, bracket, and self timer. It is not very clear in the manual but it is on the 1st menu page, page 46. Navigate using the arrow button. The default is single shot. When you set the camera to self timer, after taking the shot, it will return to the previous mode, ie. single shot or continuous. If you always use the self timer, you can reprogram the flash mode button to set the drive mode without going to the menu, page 65 of the manual. If you do not have a manual, you can download here : http://ca.konicaminolta.com/support/manuals/digital_cameras/dimage-z/index.html