Onida TV service code needed

TRY THIS FIRST TO OPEN SERVICE MENU
!. Press SOURCE button
2.In SETUP menu screen press numbers 2580 on remote
3.On FACTORY SETTINGS menu select PANEL SETTINGS
4.Then make appropriate changes
Then Power off then on tv and it should be reset

TRY THIS SECOND IF THE FIRST DID NOT WORK TO OPEN SERVICE MENU
1.Press SOURCE button
2.In SETUP menu screen press numbers 2580 on remote
3.On FACTORY SETTINGS menu select SPECIAL SET and ENTER button
4. It will take you to a second screen but still in SPECIAL SET menu click on RESTORE FACTORY DEFAULT

TRY THIS FIRST TO OPEN SERVICE MENU
!. Press SOURCE button
2.In SETUP menu screen press numbers 2580 on remote
3.On FACTORY SETTINGS menu select PANEL SETTINGS
4.Then make appropriate changes
Then Power off then on tv and it should be reset

TRY THIS SECOND IF THE FIRST DID NOT WORK TO OPEN SERVICE MENU
1.Press SOURCE button
2.In SETUP menu screen press numbers 2580 on remote
3.On FACTORY SETTINGS menu select SPECIAL SET and ENTER button
4. It will take you to a second screen but still in SPECIAL SET menu click on RESTORE FACTORY DEFAULT

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Check its 'S' correction setting. You have to enter its service mode to do this adjustment. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help.

Assuming the Recovery Partition hasn't been disturbed, boot the machine and press ALT + F10 at the same time. You will enter a recovery phase that will give you the option of restoring to factory settings. If the Recovery Partition HAS been either disturbed or wiped out, you will not be able to restore to Factory Settings without a set of disks from Acer.

sir ineed the service menu code for onida tv remote model is rc 115/d

onida tv ka auto kaise hoga

i want enter password for Onida TV for all models

HI FRIEND,
I DON'T KNOW THE SERVICE MENU OF NEC BUT TO ENTER IN ONIDA PRESS VSM AND DISPLAY BUTTON SIMULTANEOUSLY, FROM ORIGINAL REMOTE .
JABBAL,
9422117997
NAGPUR