Question about Toshiba REGZA 52RV530U LCD TV

Open Question

How do I fix my 52RV530U TV. The yellow light blinks three times.

The yellow light on the front blinks three times the repeats. The TV will not turn on. I tried holding power button, Unplugging, any ideas

Posted by on

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: yellow light blinking - blank screen - won't turn on

The problem is with the signal board. Basically, it is not allowing the power signal to go from the on button from the set or the remote to the TV. I am having the exact same problem with my 42" LCD Regza. Currently, if you are under warranty, Toshiba does not have these in stock. They will not have them available to send until early January. My TV has been at the repair shop since December 4th. I am very upset as I won't be able to watch the bowl games in HD. If your set is still under warranty then call Toshiba help line at 800-575-5469. You will need the model number of yout TV that is listed on the front of the owner's manual. They are:
27HL67
32HL67
32HL67U
37HL67
42HL67

The first number will be the giveaway as to which model you have. It is the size of your set. They will ask you to try a hard reset. (Hold pwer button down for 5 seconds until you see the yellow light go solid and go off.) This will most likely not work. If it does, you are lucky. I found that if you unplug the TV for an extened period of time, ie overnight, ity may come back on. It will eventually give out completely though. Better to get the problem addressed with the manufacturer. If you are not under warranty then I do not know what to tell you. Right now I am searching the internet to see if I can find this part to maybe purchase myself. Only if it is not too costly. If I find anything I will post here for all. If you have any questions, feel free to email me a wkjtx@hotmail.com and I might be able to give you more details on your problem. Good Luck.
WJ

Posted on Dec 17, 2008

Ad

Anonymous

  • 13 Answers

SOURCE: The red LED light at the bottom flashes three

Sorry but you are out of luck, the unit will need repair. It could come back to life in any moment but most often is related to this:

My previous post here

good luck,

mrwindex

Posted on Nov 08, 2009

Anonymous

  • 2 Answers

SOURCE: TOSHIBA REGZA 32LV67U USUALLY (ALMOST ALWAYS

This is software problem Call me at 905 6021613

Posted on Jun 23, 2010

lastchance1

  • 3 Answers

SOURCE: Toshiba 42LX196. No picture, no sound. Power

it is the power supply if you know how to soder you can just change the switch for 20 bucks

Posted on Jan 27, 2011

jdvillanueva

Jdvillanueva

  • 2098 Answers

SOURCE: 42HL196 WON'T TURN ON INTERMITTENT LIGHT FLASHING

Hi kelner1950,

This is an indication of out-of-regulation in the power supply section. The very common caused of this fault is the dried-up/leaky electrolytic capacitor in that section. It will drop the supply from normal voltage and will disable the unit and blinking error appear. Sometimes it has a bulged/dome at the top but not all, it is better that you have a capacitor checker/tester to determine its condition. Also, bad solder joints can produce the same symptom, it is hard to spot, you should use table lamp/portable lamp for finding the cold solder. Secondary reason of fault is the open fuse/fusible resistor in series with the output of regulator IC/transistor, shorted/openRegulator IC/transistor, shorted zener diode(all are in the power supply section) and the microcontroller. Best that you check the output voltage of each regulator to determine where the fault came from and narrow the job.

If you don't have necessary tools and test instruments, and can't do the job yourself, I would advice you to look for a professional to troubleshoot the problem. Don't attempt to work in the power supply if you don't know the safety precaution of handling it, there some stored electricity enough to hurt you with a little mistake only.

Also check if your unit is under warranty /extended warranty, avail it because the manufacturer of your unit will fix it for free. Don't open the back panel, this will void the warranty.

Hope I helped you.

Have a nice day!

Thanks for using Fixya.

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yellow blinking light . what does it mean


A blinking yellow for this model indicates the TV is too hot, unplug & allow 30-45 min to cool before re-plugging .
OR: lamp not installed or lamp door not closed. there is a lamp door switch that may not be closing, simulating door not closed


LED Indications

The front panel Status LED provides an indication of

the set's operation and the possible cause of a malfunction.

If an abnormal condition is indicated, perform the

Self Diagnostics procedure.

Self Diagnostics

To activate, press the front panel <ACTIVITY> &<CH

??> buttons at the same time and hold for 5 seconds.

The STATUS LED will then flash denoting a two digit

code.

• The number of flashes indicates the value of the

MSD (tens digit) of the Error Code.

• The flashing then pauses for approximately 1/2

second.

• The LED then flashes indicating the value of the

(ones digit) of the Error Code.

• The Error Code is repeated a total of 5 times.

Example: If the Error Code is "23", the LED

will flash two times, pause, and then flash three

times.

Table 2-2: LED Indications

Error Codes, descriiptions and the most likely cause of

the error are listed in Table 2-3.

Note: The TV must be in "Shut Down." The LED

will probably be indicating an abnormal

condition. If the TV is switched Off, AC is

removed, or a System Reset is performed, the

code automatically resets to "12" No Error.

See the Error Code Log to retrieve a history of

errors.

Note: Use the front panel buttons, not the remote

control.

Note: If there is no response, the front panel may be

locked by a V-Chip setting. To unlock, press

and hold <ACTIVITY> on the front panel for

8 seconds.

LED Indication Condition

Off Off (standby)

Green Power On

Slow Blink Green Power Off with Timer Set

Fast Blink Green (80 seconds) > Off Power Off (Cooling fan still working, 80 sec)

LED Indication Condition

Red Lamp Failure

Yellow TV Too Hot

Slow Blink Red TV May Require Service

Slow Blink Yellow Lamp Door Open or No Lamp Installed

NORMAL INDICATIONS
ABNORMAL INDICATIONS (For details perform Self Diagnostics Procedure.)

Jul 07, 2014 | Mitsubishi WD 65837 65 in. HDTV

1 Answer

Tv turns on and back off


Most of these sets have a self check----if Green power light comes on for a few seconds and goes off on the front of the set press and hold both the menu and input (source) buttons at same time for at least 5 seconds and release both.

Power light will blink a two digit error code like 2 blinks, 2 blinks a pause and repeat it for a total of 5 times.

Let me know if you get a error code and what it is.

Unplugging power from the set clears the error code so if that has been done you will have to try to turn set on, let it fail and then do the self check again.

Dec 02, 2012 | Mitsubishi Televison & Video

1 Answer

Tv truns on then turns off


if model indicated do the self check it has:

On front of set when green light for power goes out press and hold both the menu and input (source) buttons at the same time for at least 5 seconds and release both buttons.

Power light will then blink a two digit error code like 2 blinks, 2 blinks a pause and repeat it for a total of 5 times.

If set has been unplugged you must plug it back and try to get set to turn on--unplugging clears the errors.

Let me know what error you find and I will tell you what it means.

Apr 28, 2012 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

When the tv plugged up the power led blinks 3 times. When the power button is pressed the tv comes on for three seconds and turns back off. What could be the problem? Could this be a convergence problem?


Do the self check when power light goes out:

ON front of set (not remote) press and hold both the Menu and Input (Device) buttons at same time for 5 seconds or longer and release both buttons.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know code.


SD TECH

Sep 24, 2010 | Mitsubishi WT-46809 46" Rear Projection...

2 Answers

The tv just turns off after about 5 seconds and won't stay on. i've used the system reset and unplugged it already. no power surge, lightning storm, etc. Ideas?


If reset does not cure it and if after about 70 seconds of unplugging set the green power light stops blinking, do this:

When power light comes on and goes off, on the front of the set press and hold both the menu and input buttons at the same time for at least 5 seconds and RELEASE both buttons.


Power light should blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it four more times.

Let me know what error code you find and if this told you something you did not know, rate this solution as very helpful as I do this here for free.


SD TECH

Aug 24, 2010 | Mitsubishi WS-55511 55" Rear Projection...

2 Answers

My sony trinitron tv wont turn on. it blinks 4 times on standby. what do i do


Try a reset:
  1. Turn on the television.
  2. On the TV remote control, press and hold either the RESET or UP ARROW button.
  3. While holding the RESET or UP ARROW button, press and release the POWER button on the front of the TV. NOTE: The TV will turn off and then back on.
  4. Release the RESET or UP ARROW button.
If that doesnt solve it, you will need a repair.

Aug 10, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Tv randomly shuts off


next time it shuts down and power light goes out--do the self check.

On front of set press and hold BOTH MENU AND INPUT BUTTONS FOR AT LEAST FIVE SECONDS AND RELEASE BOTH BUTTONS.

Power light (if an error is detected) will blink a two digit code.

Most common is 2 blinks, pause and 2 blinks---set if there is a error code will repeat it at least 5 times.

If you detect a error code, let me know and I will tell you what it means.

SD TECH

Jun 24, 2010 | Mitsubishi WS-55511 55" Rear Projection...

4 Answers

REGZA 42HL167 Won't turn on


I found it!

I managed to fix it by reloading the firmware.

I posted detailed instructions on my website at:

http://www.benjammin.net/www/pages/techtips/Toshiba-Regza-42HL167.html

I hope this is still useful for others. It's so embarrassingly easy anyone can at least TRY it before calling a tech if they have any friends that are computer savvy.

-Ben

Apr 22, 2009 | Toshiba 42HL167 42 in. LCD Television

2 Answers

My toshiba 42HL167 won't turn on


Try this fix from the toshiba website. Q. I have no picture or sound, but I have a blinking power light?
Models: LCD-2007
REF:FAQLCD00090
1. Try resetting the TV by disconnecting the power for 30 seconds and then plugging it back in. If this has no
effect, try moving the TV to a different power outlet that has been tested and is known to be good.
2. If your unit continues to fail, please contact our Customer Solutions Department at 1-800-631-3811 Monday
through Friday, from 8 a.m. until 7 pm CST for a local Toshiba Authorize Service Station Hope this helps you with your problem.

Feb 27, 2009 | Toshiba 42HL167 42 in. LCD Television

1 Answer

Green power light will not stop flashing and tv will not turn on or off


You need to replace the 1000uf capacitors on the DM board thats the classic symptom of the DM caps being bad the light continues to blink repeatedly. If you need more info on the repair let me know.

May 15, 2008 | Mitsubishi WS-55909 55" Rear Projection...

Not finding what you are looking for?
Toshiba REGZA 52RV530U LCD TV Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...