Question about Dyson DC59 Animal Bagless Cordless Stick Vacuum

1 Answer

How do i remove the power supply socket from the dyson wall mount

We attached the power supply socket incorrectly and wish to remove it from the wall mount in order to attach it correctly

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 2,572 Answers

Hi Les, it's Jack at Dyson.

The end of the charger cord assembly which attaches to the machine itself is held in place securely by a friction-fit connection. You should be able to use something like a flat-bladed screwdriver to free the end of the charger cord from the docking station. Then with the docking station removed from the wall, you should be able to disconnect the charger cord completely from the rear of the dock, following the route shown in the image below:

how do i remove the power supply socket from the d - remove-power-supply-socket-from-dyson-wwjhwhxcdangi3pthjaixvoq-2-0.jpg

I hope this helps - if you'd like any additional advice you're welcome to give the Dyson Customer Helpline a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Posted on Mar 04, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drop down flap has come off how do i replace it


Hi Mark, it's Jack at Dyson.

The bin base on Dyson cordless vacuums is a push-fit part. The two taps on the hinge attached to the base fit into the two corresponding indents on the main section of the clear bin.

If you'd like further guidance on refitting the base, or if you'd prefer to order a replacement bin assembly, just give the Dyson Customer Helpline a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Jul 13, 2015 | Dyson DC34 DC30 DC30Handheld Vacuum wall...

1 Answer

Dc 25 dyson


Hi Karen, it's Jack at Dyson.

I'm sorry to hear you're having difficulty with your DC25's brush bar. It sounds like the removable end cap may not be fitted or locked in place correctly.

If you turn the machine over, you should see a small silver catch which can be turned using the edge of a coin. Please make sure this is turned to face the small padlock icon, to lock the end cap to the cleaner head securely. The removal and replacement of the end cap is shown in the video attached.

This should resolve the issue, but if you do need further advice, please get in touch with us directly. Our experts can confirm if we're able to help under the terms of our 5-year guarantee. You can reach us on 0800 298 0298 (UK), 1-866-693-9766 (US), or 1-877-397-6622 (CA).

Best wishes,

Jack
Dyson Online Customer Support
www.dyson.com

Jul 17, 2013 | Dyson DC25 All Floors Bagless Upright...

1 Answer

Where is the safety switch on the kirby g 4


One is at the front to the left of the fan as you look at the fan spindle with the front brush housing removed, detecting that the front attachment has been fitted correctly and the other is on the right hand side behind the hose outlet to the bag ensuring the bag or exhaust attachment has been fitted correctly, both have to be operated in order for the machine to work. These work in conjunction with the on/off switch at the rear.

Nov 21, 2010 | Kirby G4 Bagged Upright Vacuum

1 Answer

How do you put on the attachment hose to clean stairs


Assuming the rug nozzle is currently attached, lift up the headlight hood. Twist the belt lifter (black plastic square) on the rug nozzle counterclockwise to remove the belt tension. Then pull the accessory lock up until the rug nozzle comes loose of the Power Plant. You will notice two hinges at the bottom that hook on the the Power Plant's attaching bar. Gently lift up the rug nozzle to unhook it from the attaching bar.

Now your Kirby is naked. You will notice two small hooks on the hose attachment--hook them over the attaching bar, place the end of the hose attachment firmly against the Power Plant, then push the accessory lock down to clamp the hose in place.

You are now ready to use your Kirby with the hose attachment.

May 20, 2010 | Kirby Heritage II Vacuum

1 Answer

Cannot remove attachment from proteam super quarter vac


Greetings, The ProTeam backpacks us a 1.5" hose and attachments. The way that the floor tool is removed is by unscrewing the collar of the attachment. Simply turn counter clockwise on the the part of the attachment that is secured to the wand and doesn't rotate. This should loosen the floor attachment, and you may then pull it off. The other floor attachment can be fitted, and then screwed on by rotating the opposite way, clockwise which will secure the attachment to the wand. I really hope that this information was helpful to you. If you ever need parts or supplies for your ProTeam, please be sure to check out GoVacuum dot com. If this was helpful to you, please rate the repair as helpful by clicking the 4 Thumbs up icons in the top part of the repair. Thank you very much, Chris J. GoVacuum

Mar 23, 2010 | Vacuums

1 Answer

My dyson will not power up, it shorted out at the wall, socket sparked.


Common problem is a break in the wire where it enters machine, caused by accidently stepping on cable when using vacuum. You need to gain access and cut and discard about 3-4 inches from cable end and re-attach, a bit of a fiddly task but won't cost you much. Tools required: Torx 6 and a small crosshead screw driver, wire cutters/strippers, insulation tape. Basic electrical experience (if you can wire a plug correctly you can do this!)

Mar 15, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Hoover model 5870-900


you dont have the lid on correctly, if you can lift the lid up, then you have it on incorrectly.

Jul 20, 2009 | Hoover F5870-900 SteamVac Vacuum

1 Answer

I need to replace the cord. There is a short near the housing.


hi may i suggest ? if you wish to renew the complete cord/wire? why not fit a longer length to facilitate more reach thro different rooms from the preferred wall socket ? the problem of short /breakage of wires within outer sleeve near casing is common on lots of vacs it is not a difficult job to replace if you are competant with wire and colour codes remove the access cover where wire enters vac then observe the attachment of each wire ? then disconnect faulty cable transfer the rubber tube that is normally fitted at entry point to vac at this point to new cable remove outer sleeve of new cable same length as old cable to reveal the inner wires then connect to vac sockets resecure cable to vac as previous dont forget the rubber tube? refit entry cover and fit a new 3 pin plug bs kite marked ? then away to vac the rooms? hope this helps

Oct 20, 2008 | Hoover Vacuums

2 Answers

Carpet attachment


Check the plug ends at the top of the wand and the plug going into the hose handle, also at the bottom of the wand. It sounds like they may be burnt, if so they will need to be replaced. One cause of these connections going bad is not turning the power head off when connecting or disconnecting. Therre are other causes, the switch in the handle is going bad, also some of these cannisters have a relay mounted by the vac motor, sometimes they go bad.

Mar 12, 2008 | Kenmore 25512/ 25513 Progressive Canister...

Not finding what you are looking for?
Dyson DC59 Animal Bagless Cordless Stick Vacuum Logo

Related Topics:

3,389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Nick Olsen

Level 2 Expert

196 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...