How do i turn on boost - Dyson DC59 Animal Bagless Cordless Stick Vacuum

The units with two speeds have a speed controller on the motor. I reckon you will need dealer service. Try and claim on the warranty.

There is some fault finding in this video.

You are the only one with this issue.

https://www.google.com/search?q=Sebo+Felix+pet+vacuum.+only+running+at+slow+speed

20 minutes for normal use
6 minutes on turbo boost
6 hours for charge
anything less replace the battery

replace the battery
stick vacuums run for 20 minutes of normal speed and 5 minutes on boost speed

Hi there, it's Jack at Dyson.

Good news - you shouldn't need to return your machine! Dyson Digital Slim cordless vacuums have two power levels - high suction power mode for regular vacuuming, and Boost mode, which provides 6 minutes of highest suction power for tackling tougher tasks.

It sounds like you're using your machine set to Boost mode, which will reduce runtime to around 6 minutes. To change back to normal power, hold down the on/off trigger so the vacuum is running. Then at the same time, press and release the round illuminated Boost button on the rear of the machine.

I'm confident this will resolve things - if not, Dyson experts are on hand to help. You can reach the Dyson Customer Helpline for further assistance by calling 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Hi Betty, it's Jack at Dyson.

To change your DC59's power level from Max to normal, just hold down the on/off trigger so the vacuum is running, then at the same time press and release the Boost button on the rear of the machine. When Max mode is activated, the Boost button will light up - when normal mode is activated, the Button will not light up.


I hope this helps, but if you'd like further information or advice please call our experts directly on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

HERE IS YOUR MANUAL
http://www.dyson.co.uk/medialibrary/Files/Dyson/Support/downloads/UK/floorcare/Manuals/DC59_Animal_Manual.pdf

Hi there, it's Jack at Dyson.

DC35 should work on both regular power (15 minutes runtime, or 13 minutes with the motorised head attached), and Boost mode (6 minutes runtime). If your machine won't work at all on Boost mode, we'd appreciate the opportunity to take you though some quick diagnostic checks when your machine is fully charged and near to hand. If a replacement part is needed, we can also confirm if this is covered under our 2-year guarantee.

You can reach our experts directly by calling on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Try pressing the power button and boost button at the same time. Then a C will flash and the setting you had it on before will show up. I think that was caused by pressing the boost button.

That is normal. All E2 two speed Rainbows make that sound. It is because it has a brushless motor that the computer is controling, and the computer is controling everything. The motor rotor has no coils on it on the rotor, which is very small and light, and the computer gives it a small power boost when you first turn on, then increases the power until ir reaches full speed.

If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph