How toBypass programmed thermostat settings on Hunter

Just fixed mine;

Note the sensor channel on face of remote
(ref: http://www.manualslib.com/manual/257219/Hunter-44665.html)
Mine was set on Ch15, well the thermostat only monitors 14 channels had to flick down dip switch #1 to set Ch7.

Then on the base unit thermostat, see page 5 of a similar unit for 44668/44665 manual (below) then wait about 10 minutes for things to sync up, and press remote button to check sensor temp.

Note the button order for Remote Sensor Programming at base thermostat:
http://www.hunterfan.com/SupportDocuments/OwnersManuals/44008-01Thermostat44668-44660WebR02102010.pdf

Are you sure about the model? Isnt listed in the Hunter Site: Thermostat User Manual.

According woth some operation manuals, you can access at Temporary Manual Override or Permanent Override settign (click the link and see page 6).

Hope this helps.

type in your browser bar hunter fan thermostat 44150b

Basically, your going to press either of the arrows until it flashes, or about 1 second.

Then you set the temperature you desire and then press and hold the HOLD button until HOLD is displayed in the display.

Congrats, your on a permanent hold.




Then your next step would be to go get a real thermostat, install it on the wall, and then throw that piece of **** Hunter out the window as hard as you can.


The biggest problem with the Hunter stats is that they are cheap. On top of that, the programmable stats have a factory set program that cannot be simply deleted. Its always there, no matter what you do. And it makes for hassles when it goes back to factory settings and you either have to painstakingly re-program it or deal with the factory settings.

Here is a link to the Hunter manual.

http://www.hunterfanhq.com/tools/sales/hunter/preseason/images/owners/43153.pdf


I would recommend to you the Honeywell line-up. The Visionpro 8000 series is a very nice and user friendly thermostat. Its the same one I have on my wall. Very easy to use and understand. Its touchscreen and the screen can be locked to avoid unwanted use of the system.

not sure, but could check - manual/program setting. there may be a program running, if so just turn to manual. Check owners manual or manufacturer website for instructions for programming

install a new thermostat. stay away from the programmable ones. a honeywell pro 5000 is good

I would like some help programing the thermostat in my house. Hunter, Model 44300A

Thanks,

Here is a link to directions on setting up the programming modes on your t-stat. Follow them and you should be fine. Good Luck

http://www.hunterfanhq.com/hiw-prod/orderinv/frames/ps_frame.htm

google search hunter thermostat and the model number and manual and it should come up, I found mine with "hunter thermostat 44200 manual"

hi
this site as the owners manual you can download in pdf . if this helps you out .
Programmable thermostats at discount prices at hunter-thermostats.com.


riz.