Clean keeps flashing even when I've cleaned

The dial on your iron is either stuck or broken.

check the diaphragm in the carburetor making sure it isn't stiff. depending on how long it has sat, the carburetor may need a cleaning and kit then readjust it to get it to run. Mantis tillers are very temperamental and can be difficult to get to run again even for experienced technicians

If you need further help, I’m available over the phone at https://www.6ya.com/expert/kelly_69a0cf1b13789df1

your exhaust is clogged

Check condenser clean and fan working. Check it's not frozen solid because you've been running it full pelt; if it is, fully defrost it then set it at a mid range setting.

clean the filter in the bottom of the washer. refer to your use and care manual

Thats easy peasy! Get a butter knife, open the little door at the bottom left...... now this is gonna make a mess so best you put loads of towels down or find someother way because my machine is on bricks.... so when you open the door, you unscrew the dial and then water will start trickling out, the more you open, the bigger the gush.... you can close it again and control how you mop up but basically you have to unscrew and remove the dial, and there will be debris clogging the outlet, clean it and then put it back, close the door and you are all fixed.xx

Hi ! I have the same problem. THERE IS DEFINITELY something wrong there. It's not that you've not selected the effects, but the units keep on resetting. Even if you can select a different preset, it will go back to 1 & 25. I've been told that the problem has something to do with the power source, but I'm still trying to get a solution. Best luck !

If the clean button is flashing all the time then there is a problem with the button itself. The unit will not operate until the problem is fixed.

Might need the dishwasher make and model to assess the problem better.

1. You shouldn't have opened it. 2. You probably shorted out the capacitor...lucky you didn't get burned. 3. You need repairs...bring lots of money.

I was doing a search for infor on how to clean my affinity front load washer, and came across this infor and this did not work for me either, but when I turned my dial to rinse and spin then hit clean the clean option appeared.