My dataone WA3002G4 (BSNL) modem is not connecting to internet

Presume in wifi mode.
Explain the connections

connect Tikona Rj45 to lan1 of wa3002-g4 and try to browse tikona login page and login to your account.

Am I correct in asking you whether you are using a bsnl broadband....???? If so you don't need modem drivers. All you have to do is configure a broadband connection from your network connection wizard with your username and password. Good Luck

This sounds like you need to set up your main gateway or WAN port settings on the datatone to match what your ISP provides? Is it possible to get suggested settings from the ISP?

what is bsnl broadband if you have thomson to acsess the setup and all it freater just type speedtouch.lan in your browser this may help you
i think

Try to upgrade the firmware of the router.

Here is BSNL Broadband UT STARCOM-UT300R2U MODEM Driver For USB download and install the driver through device manager
Download Link
http://freecomputercourses.blogspot.com/2009/06/download-bsnl-data-one-usb-driver.html

go into the TCP/IP protocol properties where we have option to obtain IP address automatically. have only one system with IP address and the remaining 3 systems select obtain IP address automatically. It will work.

You may have to log into the router with a computer that is connected by cat5 cable using the ip address of the router, eg 192.168.15.1

make sure the radio is broadcasting.

on the wireless activity select your wireless from the detected
units, this will allow your wireless to function as the wireless will assign it an address.

I belive with this modem you will:
1.Access the interface, generally http://192.168.1.1/
2. Go to Advanced on the left.
3. Select WAN.
4. Now you may see several rows of info, look for the one that says PPPoE, and then click edit to the far right.
5. Select Next one time.
6. Here select "BRIDIGING".
7. Click next all the way to the end.
8. Reboot, after you clicked save of course.


This is how you bridge 98% of PPPoE providers with a similar paradign modem.

Of course the next device in line will have to provide your username and password for your DSL connection.


Hope this helps!