Dl f error code kenmore 11045081400 washer. what does it mean?

The DL error code is an indication that the door lock is having problems locking the door or confirming that the door is in fact locked. This is usually caused by a defective door lock assembly, wiring connection problem or the machine control board.Mar 9, 2009

Why is my Kenmore washer displaying a DL error code?

and more

https://www.google.com/search?q=Kenmore+top+loader+DL+error+code

..

Lots of parts suppliers in the link including sears

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk009OnnIybcjUl8T8XgZnCGrw9S32g%3A1610575311760&ei=z23_X4npLcyx5NoPxea92A8&q=kenmore+elite+washer+parts

..

Search Results

Why am I getting an FL error code on a Kenmore Calypso ...

www.shopyourway.com > Manage My Life > Questions
I have a Kenmore Calypso washer model 11022062100 and there is water in ... Why am I getting an FL error code on a Kenmore Calypso washing Machine?
fl error code on calypso washer-need help!! - Home Forumsths.gardenweb.com > Home Forums > Laundry RoomJul 22, 2006 - An FL error code keeps flashing on my Calypso Washing Machine. I can't do laundry. Could someone please tell me what I need to do to ..."F dl" light come on - Kenmore Elite HE3 Washing Machinehttps://www.ifixit.com/.../Why+is+the+%22F+dl%22+light+come+o...iFixitThese are the errors for error code F/dL Door Lock Error Condition A Door Lock Error... The Kenmore Elite HE3 is a washing machine by Kenmore. ... On Amazon I was able to get the CCU (Kenmore CCU Central Control Unit .... and a dose of WD40 on those contacts should keep that from misbehaving in the future as well.Kenmore Elite Calypso FL error code - ApplianceBlog

Error code DL means door lock failure. Best off to call a certified repair company such as Sears.

DL error code means the door is locked. The door lock mechanism may need to be replaced. I would not recommend attempting this on your own I suggest you call a service tech.

You are getting and error code F-DL which means the main control board is sensing that the door is not locking. Most likely a problem with the door lock/latch assembly.

does your washer stop on spin cycle some time. your is 4/5 years old?. f dl means door lock system is bad but i don't think so. do you have other error code beside f dl if yes then i think your washer need new main control board.

DL indicated a door lock failure. it will flash DL, then a F followed by a number (80, 82, 84, 85)

The dL error code is a door lock error. The control board will attempt 6 times to lock the door before displaying the F dL error code. This is an indication that either the door lock is malfunctioning or the control board is not responding to the door locking circuit. Be sure the door is securely closed before attempting to start the washer. Open the door & check for clothing or something that may be stuck in the door boot area. If the door is securely closed & you still have the error code I would recommend having the door lock assembly replaced.

Good Luck and Please rate

If you see "dl" or "du" error codes, these are usually indications of a failed door latch assembly and will require replacement. You can click on the following link if you need step-by-step instructions on how to replace the door latch:

http://www.fixya.com/support/r587965-door_latch_replacement_fdl_error

Hope this helps!
Thank you for contacting us at FIXYA.com