There is a problem on ink it not workinig corecterly

You are out of ink or the head is blocked.

CHECK IF YOU PUT CORECTLY THE NEW CARTRIDGE
CLEAN/REALIGN CARTRIDGES AND PRINTHEADS

Sounds like a dirty clogged fuel filter

1.Set the paper attributes for the corect paper weight
2.Check if there is oil in the oil tank
3.Check if you have overoiling contition

ccooling fan not workinig, bad realy for fan, stuck thermostat, to low coolant level due to leakage.

The distance is not stable. You have made everything corectly and you how they work.
Now you need to uadjust the distance when the machine is workinig on. The required presure should be 1.2 to 1.3 bar which is the ideal between the temeperature of the milk and temperature of coffee. So you should hear and see the switch going of when the machine reach the above mention pressure.

hmm..ok..did you try a clean cartridge operation yet?

http://tinyurl.com/6qcpgy

you may need to run a head clean and calibrate first check www.lexmark.com for assistance

Try this link for more Printer Resources

the color cantridge u changed is genew or u have token the other and just fill them fith ink???

if u have bought new cartidges go try print a test page and check if u have installed the cartidges corectly

if u havn bought genew cartidges i seems that the heads are blocked with ink!! go buy some new ones and i believe u will be fine



dont forget to vote!! :)
Stratos