How do I replace kitchenaid microwave door handle?

Question edited for clarity

The glass, inner door,and outer door can be purchased spearately or they sell the complete door.

https://www.kitchenaidparts.com/Shop-For-Parts/a6b121d653453-x646f6f72/Door-Model-KHMS155LSS2-Kitchenaid-Microwave-Parts

However;
For more information on replacing this part, please call 866-698-2538 for assistance in scheduling a service appointment.

This place says the complete door is obsolete.

https://www.partselect.ca/Models/KHMS155LSS2/Parts/?pSearchTerm=door&start=1

It is probably time to replace it

https://www.google.com/search?q=KHMS155LSS-2+microwave+door
..

KHMS155LSS0 - May 27, 2017

On many models you can open the door all the way and gently lift it off.

Otherwise, you have to do some disassembly.

The support page for your model, with manuals, is here.

FixYa doesn't notify me when there's a response, so if you have other questions, please contact me directly.

- William E. Miller, AS-EET
[email protected]
http://www.microwavecontrol.com
Microwave Oven Control Panel Repair Nationwide
"Recycling by repairing since 1982"

Here's my standard post on getting into the doors:

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

You can find handy exploded views and order parts by model number here.



We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

good day,
hope this link below will solve your problem.

kitchen

Remov fan cover, bottom plate, you can either do it right and pull out the entire plastic baffle to reveal the hindge bolts or you can just jam something between just enough to get a long socket on a small socket wrench. You must replace the entire door. Trying to replace just handle is almost impossible.

take screws out of side then use flat butter knifes to hold the push pins out of the way so glass comes out then get to the handles

I had the same problem with the same model of KitchenAid Microwave. KitchenAid customer service will act like they never heard of the problem, although if you google it, you will find that this is a very common problem. Ask to be transferred to the safety department. After more than 6 months of complaining and several repair attempts (they replaced control panel and switches), KitchenAid finally gave me a full refund. This is a serious safety defect for which they have no fix. The product needs to be recalled, and I am willing to testify that KitchenAid was criminally negligent when this product finally causes a house fire and possibly serious injury or death.

with most microwave ovens, for safety reasons... they are permanently sealed to prevent microwave leakage burns... i hope this helped you out..

Visit this web site www.applianceaid.com enter your model number then scroll down to your part. Click to enlarge exploded diagram and view the entire diagram for exact assembly. Now you have information you need. If you found any of these suggestions helpful, please rate my solution. D. Lange

part number 8184264 should do the trick.