Iphone i cant get my mortorola bluetooth headset to sync up with my new iphone. my iphone is searching for something in 'discoverable mode' but never identifies the headset. id there any help you can offer me in ensuring that my headset is discoverable? my headset looks like the H3 but it may be an older model that looks similar. Thanks, David R

Pairing with iPhone

1. Connect the iPhone Dual Dock or iPhone Bluetooth Travel Cable to a USB 2.0 port on your computer (not on the keyboard).
2. Connect iPhone and the headset to the dock or cable. The headset pairs with iPhone automatically.

Pairing iPhone Bluetooth Headset with another Bluetooth-enabled deviceTo pair the iPhone Bluetooth Headset with another wireless device, such as a Bluetooth-enabled phone or computer.
Step 1: Set the headset to be discoverable

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.
   
   The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

See the instructions that came with your other Bluetooth-enabled device for more information about pairing it with Bluetooth devices.

Did you put the bluetooth device in pairing mode? That way it is discoverable. Go to the bluetooth screen on the iPhone. Do you see the device listed there?

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.
   
   The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

Hi, you don't need to unpair the old device, Just pair the new device,it does not have anything to do with the old one.

Step 1: Set the headset to be discoverable

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

See the instructions that came with your other Bluetooth-enabled device for more information about pairing it with Bluetooth devices.

Hope it helps.
Feel free to pass your comment.

Thanks for using fixya...

Hi,

Step 1: Set the headset to be discoverable

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

See the instructions that came with your other Bluetooth-enabled device for more information about pairing it with Bluetooth devices.


Remember all blue tooth use the same codes.
hope that helps...
thanks for using fixya........

Step 1: Set the headset to be discoverable

Turn off the headset.

Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.

On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000. let me know does thsi help regards golu_fixya
Step 1: Set the headset to be discoverable

Turn off the headset.

Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.

The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.

On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

Most Motorola headsets automatically go into pairing mode when you turn them on. If you have a light on your headset, it will be pink when you turn it on (and will begin flashing) and then change to blue. When the light is pink it is ready to pair. If you don;t have a light on your headset, it will stay in pairing mode for 10-15 seconds.

Turn your headset OFF then, (with your phone turned ON) in your phone's menu (usually) you'll go to Settings > Connectivity > Bluetooth (and select ON) Then select, Search for Bluetooth Devices and at this point you want to turn your headset ON.

It may take a couple of tries to get your phone to locate your headset but when it does it will identify the headset by the headsets model number when it locates it.

The pairing code should be four zeros. 0000.

click on "settings"
click on "General"
click on "Bluetooth"
If Off, click it ON
It should start searching for devices to pair with (make sure your other device is on and "discoverable")
If the iphone locates the headset it should prompt for the code.

iphone dosnt support OBEX.
obex is the method for file transfer. it only supports handsfree headsets. there is no method for file transfer via bluetooth, u wanna go for app "dropcopy" this is for file transfer b/w 2 iphones.

the bluetooth on thess phones are only campatible with the headset not the data transferring.