SAMSUNG Gear Watch not switching ON

have you tried a jeweller??

From your samsung phone, select the apps that will be shared with your smartwatch

Job for a jeweler I would suggest.

http://www.galaxynote3manual.com/samsung-galaxy-gear-manual-instructions/

http://www.youtube.com/watch?v=zDQiR5HinTA

Have you considered that a dead battery might be the cause of this. They don't last longer than a year. I would not attempt to change the battery on your own if you would miss this watch if you broke it. I change batteries nearly everyday and the digital ones are by far the most difficult. If you did change the battery on your own already the reason it is not working is because you negated to short the battery. Digital watches sometimes need to be shorted after a battery replacement to turn back on take a pair of metal tweezers and put one end on the positive side of the battery. Look for a little hole with a contact on it that's either A/C or reset. Put the other end of the tweezers here. If that doesn't work a tiny spring feel out of the watch is not replaceable and you must therefore replace the watch if that is the case. Hope this helps.

My Citizen Skyhawk analog UTC hour hand is always 9 hour back of the UTC digital hour. I've tried to reset and hour/min hand alignment process without success.

No solution. I just tried to change my battery yesterday and am receiving the same message. If I get a resolution I'll post it. Just wanted to let you know you're NOT alone!

Sounds like a job for a professional.

It could be that the crown is too far down the shaft and this might stop the shaft being pushed in far enough to activate the watch.

You should take it to a watch repair shop snd ell them what happened.

Try rotating the analogue hand 12 hours ahead of the current time