My pioneer AV receiver SC-1522 isn't working. UE22 blinks and the Advanced MCACC light is on. How do I fix it?

inside board capacitor problem .
replace it with same capacity.

Using All Zone Standby; Setting The Switching Time For The ...

https://www.manualslib.com > Pioneer-Elite-Sc-91

Pioneer Elite SC-91 Manual Online: using all zone standby, Setting The Switching Time For The Receiver Operation Mode, Resetting The Remote Control ...

Operating Instructions - Pioneer Electronics

https://www.pioneerelectronics.com > PUSA > Manuals

PDF Increase the separation between the equipment and receiver. - Connect the ... Using the SR+ mode with a Pioneer flat panel TV . ... Plug the power cable into the AC outlet and switch on the receiver.1 Make ... See Automatically setting up for surround sound (MCACC ... 4 Optical and coaxial digital audio inputs (x7 (SC-07),.

AV Receiver - Pioneer Electronics

https://www.pioneerelectronics.com > PUSA > Manuals

PDF The STANDBY/ON switch on this unit will not completely shut off all ... Plugging in the receiver . ... Automatically conducting optimum sound tuning (Full Auto MCACC) . ... Setting the switching time of AV amplifier operation mode. ... On a Mac, launch Safari and click <SC-85> displayed in 'Bonjour' on the Bookmarks bar.

AV Receiver - Pioneer Electronics

https://www.pioneerelectronics.ca > Manuals > Home

PDF Before plugging in for the first time, read the following ... The STANDBY/ON switch on this unit will not ... Connecting a satellite/cable receiver or other set-top box . ... Switching on/off the Acoustic Calibration EQ, Auto Sound Retriever or Dialog ... For the SC-65, the optional AS-BT200 Bluetooth adapter works together with ...

You may try a factory reset; found in your owner's manual, but most likely, your receiver has DC Offset, meaning a damaged amplifier. If you are interested in repairing your Pioneer, please visit my website at audioserviceclinic.com. Thank you.

By the way, if it's under warranty, contact Pioneer. It has a 2 year warranty. By the way, I worked for Pioneer as an audio engineer.

PIONEER SC-LX56 flashing blue MCACC light

Pressing 'down arrow' + 'Multizone On/Off' button together for 2/3 seconds worked for me and powered up the amp. No factory reset was needed it just started working. It had been out of use for several weeks because of this issue.

try holding the "TUNE -" button and the ZONE 2 on/off button and see if it turns on. If its turns on, but turns back off again, you either have a problem with your speakers (try disconnecting them) or there is a problem with the receiver that needs to be repaired.

Your unit is locked in protection mode. Hold the advanced surround button and the power button to turn it back on. If it shutdown right away, then you shorted out the amp and need to take it in for repair.

Pioneer elite sc05 advance mcacc blinking

Not a fix, but an explanation of what it means...

Register and download the manual for free audio.manualsonline.com

http://audio.manualsonline.com/manuals/mfg/pioneer/vsx1014tx.html

http://dl.owneriq.net/1/1cfdd11c-3861-40e2-abcf-e0ce2e0245c5.pdf

Page 54

AMP ERR blinks in the display, then the power automatically switches off. The MCACC blinks
and the power does not turn on.

The receiver has a serious problem.

Do not try to turn on the receiver. Contact a Pioneer authorized independent service company for assistance.

i do have same problem MCACC light blinking and no power. i bring in to norman electronic, and waiting for them to call me back