Fix my symphonic video setting so i can actually see how to play my game

Hello friend...

"Can't Play Video" just follow these steps to fix this issue:
1.In the upper-right corner of the Chrome browser, choose More (appears as 3 dots), then choose Settings.
2.In the 'Search settings' edit box, type Flash and press Enter.
3.Click Content settings.
4.Click Flash.
5.Turn on Allow sites to run Flash.
6.Open HBOGO .com in a new browser window and try playing a video.


For any help visit us: HBO Go Help

symphonic is well known for this-no buttons on unit for key features and a universal is not going to help either, suggest you go in search of the original remote and hang onto it.....

no possible unless set has actual video or input button on it---almost all the Symphonic sets only have this feature on the original remote.

Hi,

The input from the Sega wont be on any channel number - you need to select the correct input for the Sega using the "INPUT SELECT" button on the Symphonic remote control supplied with the TV. Switch on the TV the Sega, then press this button repeatedly until you can see the picture from the Sega.

- If you are using the sockets on the BACK of the TV, the correct input is "VIDEO 1"
- If you are using the sockets on the FRONT of the TV, the correct input is "VIDEO 2". You can also switch to the "VIDEO 2" input by pressing the "GAME" button on the Symphonic remote - if you still have it.

If you don't have the Symphonic remote, look for a button marked "INPUT" or "SOURCE" if you are using a universal remote.

If you don't have any remote for the TV, you will only be able to use the sockets on the front of the TV. You will then need to switch to "GAME MODE" by using the buttons on the front of the TV:

1. Switch ON the TV and the Sega;
2. Press the MENU button;
3. Press the VOLUME UP button to open the PICTURE MENU;
4. Highlight GAME MODE using the CHANNEL UP/DOWN buttons;
5. Set GAME MODE to "ON" using the VOLUME UP/DOWN buttons;
6. Press MENU again to close the menu

You should now be able to see the picture from the Sega. If not, check you have correctly connected the Sega to the TV. When you have finished using the Sega you will need to use the method above to switch game mode off again.

Hopefully, I've covered every possible angle. If you have a different Symphonic TV model from the one listed above (ST420FF), the method should be similar, but if you have any difficulty, please post back for further assistance.

BElectric.

This is actually overheating on the board - the choices you have to fix it are to send it in or you can fix it with a good guide at home.

Try patching the game, think that was a known issue and had to be resolved by actually patching the game. Also sounds like you might be playing a skirmish instead of missons, check what your doing. If you set up everything in the beginning such as who you fight against, your playing against the CPU and not actual missons.

DrakeTech.

lol well plag in a game system then put the tv on video or channel 3 or 4. Then tun on system. (are you messing with me?) (this is basic stuff.

the only way to turn i to the input is by pushing the button "input" or "game" on your remote. "input 1" is the back connectors and "input 2" is the front connectors. "GAME" is also the front connectors but it turns that "game mode" on that is in the picture settings. suggest you read the manual that came with the tv too. it explains this all in there with pics and stuff.
if you lost the manual here is a link to it on there website.
http://www.symphonic.us/pdf/om/ST420FF.pdf

hope this helps.

Try Channel down from 2 or up from 99.......T.

I have the opposite problem. I don't have the remote, it broke, and I'm stuck on channels when I want to play a game. How do I fix that without the remote?!