All of our programmed features stopped working paging, redial etc

It's a way to access many features. Program a speed button-Feature Redial, program DND- Feature 60, check what port you're on Feature 3 or 4. Easy to find a user manual online, just type in your phone system type, user guide, then PDF. Don't put in your phone type, those phones work on a dozen different systems.

If the button is programmed as a feature button, then Feature, Redial, press the button to program, dial 1 for typical feature, dial extension you want on it, press Feature to write and exit. If the button isn't assigned for features, this won't work until someone goes into system programming and does that.

To program a redial button press feature 00. press the button you want to make a redial button, and enter feature 05. Press feature 00 to exit porgramming.

Program feature 03 call waiting for recall.

Feature 05 for LNR. Redial.

Feature 00 press an unused button if it has something assigned to it press the mic button and press the button again to assign the code. Or just remember the code and use it. The feature button is just that when you use up buttons.

Press Feature 00
Press button labeled Redial
Press Feature 05
Press Feature 00

Cheers

Here is a link to program buttons.

If you want to program auto dials to see when people are on the phone, those must be programmed on a lighted button, follow the procedure to program the phone, and use the left intercom button and the 2 digit extension number.

With the handset down, press Feature # 3, then press the key you wish to make a redial button, press CHG, press FEAT, press F8, press save. Now it's a redial button.

I dont know how we got disconnected but here is the instructions

Adjust the width of the document guides (1)
to fit the actual size of the document.
2 Insert the document (up to 10 pages) FACE
DOWN (2) until a single beep is heard and
the unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3 If necessary, press {A} or {B} repeatedly to
select the desired resolution.
4 Press {DIGITAL SP-PHONE}.
5 Dial the fax number.
6 When a fax tone is heard:
Press {FAX/START}.
When the other party answers your call:
Ask them to press their start button. When
the fax tone is heard, press {FAX/START


To redial the last number
1. Press {REDIAL/PAUSE}.
2. Press {SET}.
L If the line is busy, the unit will automatically
redial the number up to 2 times.
L To cancel redialing, press {STOP}.
To send more than 10 pages at a time
Insert the first 10 pages of the document. Add
the other pages (up to 10 at a time) before the
last page feeds into the unit.
Pre-dialing a fax number
You can dial the fax number first before inserting
the document. This is convenient if you need to
refer to the document for the other party’s fax
number.
1. Enter the fax number.
2. Insert the document.
3. Press {FAX/START}.
Sending from memory (Quick scan feature)
You can scan the document into memory before
sending it. To use this feature, activate feature
#34 (page 62).
1. Insert the document.
2. Enter the fax number.
3. Press {FAX/START}.
L The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data. If the document exceeds
the memory capacity, transmission will be
canceled and this feature will be turned OFF
automatically. You must transmit the entire
document manually.
L This feature cannot be used if {DIGITAL SPPHONE},
{TALK} or {SP-PHONE} is
pressed.
To stop transmission
Press {STOP}.

You have to setup ARS. Not easy if you don't Know how to program Toshiba system. What Toshiba system do you have

Business phone systems have one time setting for all telephones. It is s syatem programming feature and not something found in a user guide. Follow this link for information on changing the time on different PBX phone systems. http://www.tel-programmer.com/time_setting.html