Tv wil not turn on just keeps making a clicking noise

Take it out and see if the fan wil turn by hand. It may have somethng obstructing it. The clicking is the motor overload. It wil burn out if it continues to keep clicking.


www.dimplex.co.uk/assets/.../Cadogan_Stove_Instructions_Issue_2.pdf

time for a NEW robot.

A clicking noise is most likely hard drive related. Does your clicking noise sound like this?

Take the tv aparts,take some Q tips with some rubbing alcahol clean the DVD laser eye.Should help the DVD player side to work,than the tv might go in to the functional modes.

hi it sounds like the engines electric cooling fan has automatically come on as the engine has got hot enough for it to be cooled down
you may have never noticed it before .
check your coolant level and your oil level to be on the safe side and keep an eye on the temperature gauge the fan should come on when the gauge goes past normal running teperature if its coming on a lot there may be a problem but its probably working as normal

The clicking noise is coming from the power supply relay. Is makes this sound when the TV is usually turned on or off but has become faulty. It will only get worse over time usually until the TV will no longer turn on anymore. You need to replace the power supply in order to fix the TV.

This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.

yes,veryry possible you have a bad transister on the power supply board .best way to fix it is to change the hole board.

When you turn your tv off turn it off using the remote control then turn off the tvs switch itself... Try this for a few days hope it works for you.
Thanks.

Normal 0 My kdl-46v4100 has been off all day and I've heard two or three clicks. It sounds exactly like the click you hear when it’s been off all day and you go to turn it on. A few minuets after it clicked I turned it on and to my surprise there was NO click sound.
This LCD TV (like most large displays) uses an Active Matrix of thin film transistors, aka TFT. Essentially the screen is a large array of transistors and capacitors. According to my previous observations; I suspect the random clicks are associated with the LCD circuitry providing a fresh “standby charge” to the TFT array (hence no click on power on following a “refresh”).

Not a solution, but an explanation other than “cooling off…”