GE True Temp Oven, Model number JKP1580A388. Serial number GA6 53032O Starting from off, without touching it, the oven began beeping 22 times and showed Broil on display. It stopped, and repeated this cycle. We pressed clear off, it stopped, only to begin again later. I held in the Clear/Off button for many seconds, this morning. This evening, the display reads F7. I have not tried to turn the oven on yet. Please help.
Https://www.youtube.com/watch?v=Rg7Dp4LBxtA
it seems its the connections ribbons on the control panel is wrong
will give you a clue look down the replys to the video to get more info
some very carefull cleaning is needed inside the front panel rework some connections
i use deoxit 5 and a rag
spray the deoxit to a rag then wipe the connection ribbons
then dowse the plugs with the deoxite
wait a while and re plug then carefully
should cure it
i would add a blob of grease to the sockets once its all running
to avoid further corrossion
hope this helps
Hello there,
This may be related to the F7 problem even if you are not getting an error message. Go to my web site at the following link:
http://fp1.centurytel.net/Powerman/Dreaded%20F7%20Problem.pdf
Please let me know if this works for you. I have sent my fix to over 1300 folks.
Good Luck,
Powerman
303 views
Usually answered in minutes!
reading more i see some people had to replace the tactile switches again using deoxite you can cure this look to ebay for deoxite D5 spray it on wait a few mins actuate the switch a few times wait a min or two and spray again should fix the switches totally use a rag or kitchen roll to wrap around to soak up any spray but the can has three settings so use low press the switch in first then spray it let it go
press in and out each switch as you spray remember to just wipe the connections on the ribbon cables
×