Would the the Avital 4003L add on keyless remote starter model be compatible on a 2002 Pontiac Grand am w/factory keyless entry remote? And would I need to buy a bypass module with this system? If so,

Jeremiah Meyer

• 204 Answers
• Posted on Dec 08, 2008

SOURCE: How to add remote starter to existing keyless entry/alarm system

No you do not need to scrap anything. Most of the starters at www.directwholesale.net will work with everything you have installed. Also its a good idea to leave all that stuff in anyway as it will take away from the resale value when you go to sell it. Most of the new remote starters will take place of the factory remote anyway so you will only need to carry one (provided you get the one that has all the features on it). If you get the cheapest one out there, you would still carry the factory remote as well (which is what I do myself). I would personally leave all the factory Honda System in and get the cheapest starter out there. Seems like this would 1.) be the best bang for the buck and 2.) not take away from the value of the vehicle since nothing would be removed. Thank you for using FixYa. Good luck to you!

Sincerely,

JC

SOURCE: Keyless Entry for 2003 Grand Am

This is a Dealer Option and they all Charge Different Prices. I have heard of Prices from 50.00 to 175.00 depending on what Options are on the Car.

appman67

• 33 Answers
• Posted on May 03, 2009

SOURCE: Keyless entry blinks dome light and does nothing else

The remote is fine - your problem is the lock actuators in the doors. They're a bit of a pain to replace - so, you may want to have a professional do it.

SOURCE: program factory remote keyless entry for 2003 Hyundai XG350

This bulletin supersedes TSB# 02-90-001.
DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:

• 2001 - 2004 MY Elantra
• 2001 - 2004 MY Santa Fe
• 2002 - 2004 MY Sonata
• 2001 - 2004 MY XG300/350

• The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
• The most current Keyless Adapter Cable Instructions are available in the following shop manuals:

1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable.
2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
   
3. Turn the Hi-Scan Pro ON
   and press ENTER
   . NOTE "Release date 29. Sep. 2003" OR LATER
   must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
   
4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
   and press ENTER
   .
5. Select vehicle model and press ENTER
   .
6. Select option "TRANSMITTER CODE SAVING"
   and press ENTER
   .
7. Ensure that the key has been removed from the ignition cylinder before proceeding.
8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
   
9. Press ESC
   on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
10. Turn the Hi-Scan Pro OFF
    and disconnect the adapter cable from the multi-purpose connector.

SOURCE: does chrysler sebring 07 model need bypass module

yes you will need a bypass,