At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a S P A boost gauge on my 2003 Yamaha rx1 snowmobile when I start it up it flashes a F L code does anybody know what it means plz let me know thx
Re: I have a S P A boost gauge on my 2003 Yamaha rx1...
You would be better off posting this on a snowmobile site rather than a motorcycle site BUT a very good place to ask such a question would be a Yamaha dealer service department.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like a vacuum leak.... if you have an aftermarket boost gauge its supposed to be -20in for the idle. for not boosting you could be in saftey mode where the computer severly limits all of the engine functions. do you have a check engine light? if so under the passenger floorboard, remove the wood from under the carpet to expose your ecu turn the ignition to the on position but do not start the car then with a small screwdriver(flathead) turn the knob on the side of the ecu clockwise all the way for 2 seconds and then back. your ecu is now in diagnostic mode. the little led above the knob will now be flasshing. count the flasshes. it will be slow flashes followed by fast flasshes. ex: 4 slow flashes followed by 2 fast flashes = code 42. a code 55 means all is fine. there are numerous code sheets for the z32 on the internet and easy to find. i hope this helps and good luck. let me know what code you get if any and ill try to help more from there.
×