Cannot get my kenwood kdc-mp819 to switch to aux

SOURCE: hey jeff about the kenwood

In standby you have to hold menu doen untill menu appears on screen, Scroll to aux and turn it on :)


Don

SOURCE: my mp3 player doesnt work

Make shure unit is in standby, Press menu till meny appears on screen scroll to aux and turn it on

Don

SOURCE: aux location

There is a RCA cable that comes off the back of the radio and also another cable for 3.5mm (mini-stereo jack) that also comes off the back of the radio. The RCA jacks can be used for "AUX" or "Sub-woofer" and the 3.5mm jack is just for "AUX". Your ipod can use the audio output jack or the headphone jack and plug that into the 3.5 mm jack on the back of the radio. You will need a "3.5mm male" to "3.5mm male" stereo cord that can be purchased at Radio Shack or Best Buy. Then you select "AUX" on the display with the source button to listen to it. You may need to go into the menu and activate the "AUX" input. Check your owners manual for details.

SOURCE: turn aux on on kenwood kdc-mp205

In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.

SOURCE: kenwood kdc mp336ax cannot get aux.to work or show

go to standby and hold the menu button. use fm and am to navigate until you see aux1 off. turn it on with the forward button then you are done.

Testimonial: "thanx works great"