Then i turn my rca tv on manually it wont come on

If your RCA TV won't turn on, there are a few things you can try:

1. Check the power source: Make sure that the TV is properly plugged in and the outlet is functioning properly. You can also try plugging in a different device to the same outlet to see if it works.
2. Check the power cord: Check the power cord for any damage or fraying. If you see any damage, try replacing the power cord.
3. Try a different remote: If you are using a remote to turn on the TV, try using a different remote or try turning it on manually using the power button on the TV.
4. Check for any error messages: If the TV is showing an error message or blinking lights, refer to the user manual or contact the manufacturer for troubleshooting steps.
5. Reset the TV: Unplug the TV from the power source for at least 30 seconds, then plug it back in and try turning it on again.

If none of these steps work, it may be a more serious issue that requires professional repair.

Pull the batteries out of the remote, and turn the TV on manually if you can. If it still goes off, your problem is not in the remote.

If you do not have the owners manual GOOGLE THE EXACT MODEL NUMBER WITH MANUAL

You can purchase a remote control from Partstore.
http://www.partstorecanada.ca/Part/Thomson/RCA/27F520TYX1/Thomson/RCA/265714/New.aspx

Replace CP150, CP120 and CP114 on the deflection board. You can get the repaor kit at the following link listed under RCA repair kits www.tvrepairworld.com

Bad FBT! flyback transfomer.

What is your Chassis# and what year is TV??

need the codes for the remote to porgram it back in

i would honestly suggest if you still have the receipt return it back. dont forget your rating thanks.
This is a very common problem for RCA TV. I have one as well. or go to www.tv.rca.com/ there are free manual there

I can only suggest that you Double check you have the connections correctly set ie. coax ariel to ,(dvd /digi box reciever ect...)
Also check again (& i know this is state the obvious)
your tv manual. IF you havent a manual do a google search for your tv (make & model) & search for a manual.

Ive have had a simmular experience when programming channels to a Vid-Recorder & when i finished the channels dissapeared.

I realised I didnt have the video set to the correct channel with the tv usually channel 9 or the highest channel on the tv.
So i waisted a good half hour for nothing.