The nylon drive gear on Craftsman Garage Door keep stripping

You need to remove the cover from the motor unit and check the drive gear. It is a white nylon gear just in front of the motor and most likely you will find it is stripped. It will be obvious.

Check for a broken door spring and remove the cover from the motor unit and check for a stripped drive gear. The gear is white nylon and it will be obvious if it is bad.

The drive gear is stripped. It is a white nylon gear and is just in front of the motor.

You have either a broken door spring or a stripped drive gear. The drive gear is white nylon and is just in front of the motor. It will be obvious if it is bad.

Check to make sure you don't have a broken door spring and also remove the cover from the motor unit and check the drive gear. It is a white nylon gear just in front of the motor and may be stripped.

Remove the cover from the motor unit and check the drive gear. It is a white nylon gear just in front of the motor and is most likely stripped.

Check the door springs, then remove the cover and take a look at the drive gear. It is a white nylon gear just in front of the motor. May be stripped.

Check the door springs. You could have a broken spring. Also remove the cover and check the drive gear. It is a white nylon gear just in front of the motor. It is possibly stripped. This is a good time to release the door from the opener and operate it by hand to see just how heavy it has become.

The drive gear is most likely stripped. It is a white nylon gear just in front of the motor. The parts number is 41A2817 and is available from Sears or any good door opener service company. It comes with instructions.

Your door is not properly balanced