Loc light won't go out on front loaderwasher how to remove

I appreciate your post, friend!
Based off the information you have provided you are receiving a "LOC" code on your Frigidaire washer. "LOC" typically means that your control lock feature is on to remove the lock feature you need to hold down the options and select buttons for ten seconds. I hope this is helpful. -Matt

Press and hold the option and select buttons at the same time and continue to hold both down and for 5 seconds and see if the LOC light goes off.

Typically to unlock the controls on a Duet washer what ya do is push and hold the END OF CYCLE BUTTON for 3 seconds and the control should unlock

HI. To unlock the controls,press Options and Select at the same time and hold 10 seconds until ”LOC” is no longer displayed. You can access the Operations manual and other literature, by clicking the links below.

Click For Your Complete Owners Manual.

Click For Your Operations Manual

Just had same problem. After removing boot/rubber gasket around opening, and replacing door lock assembly it still would not work giving the same ERR LOC message! Another site directed me to press the "Options" and "Select" buttons at the same time. BINGO! My husband was quite proud of me!

IF THIS HAPENS AT LOW SPEED YOU NEED TO REMOVE FRONT ABS SENSORS AND CLEAN THE MOUNTING SERFACE

Problem solved.

All the lights are on, but the door lock. We have unplugged it, doesn't help. Our washer is the front load, model LTF 2140ES0.

it sounds like you need a new door switch they cost a bout 15 pound you might get one off ebay don't for get model. number its in the door trim or on the front right bottom next to the programmer ok hope i helped you

turn the selector knob so the machine comes on then press the "options" and "select" bottons at the same time for 3 seconds.