How do I get my trail camera to work? Put new batteries in, turned it on and says WAIT. It has a sim card in it and have changed it with another sim card.It worked fine after I purchased it last seaso

I think the SIM card is bad - try another one.

I replaced batteries with 4 new duracells and it went into setup mode. Works fine now.

Turn camera off, remove battery's and sd card. With everything out turn it to the on position for about 2-3. After 2-3 minutes put batterys back in while on the on position. Once he says no card or no memory turn the camera off put sd card back in and test the camera.

I have the exact same problem with my M80XD. I have a request in with Moultrie. I will post their answer.

Go to www.moultriefeeders.com...under mini cameras find the M80...open "full details"...scroll to bottom and find manuals/downloads...where it says upgrade click and download to your pc...be sure you download for your camera as Moultrie named all their camera downloads the same, but each is model specific...it will download as a compressed file.I use windows to extract file directly to NEW SD card installed in my PC's card reader slot.If your computer doesn't have a card reader, connect one thru a USB port.
Once you have upgrade unzipped to the sd card, put card into the M80 and switch the camera to the "aim" position....should show "upgrade NO"..press up/down key to change to "yes"; press enter and wait...DO NOT TURN OFF CAMERA AND USE NEW BATTERIES...camera will turn itself off when done.Power on camera and test it out.This has solve the trail err and a few other issues with the M80.

Go to www.moultriefeeders.com...under mini cameras find the M80...open "full details"...scroll to bottom and find manuals/downloads...where it says upgrade click and download to your pc...be sure you download for your camera as Moultrie named all their camera downloads the same, but each is model specific...it will download as a compressed file.I use windows to extract file directly to NEW SD card installed in my PC's card reader slot.If your computer doesn't have a card reader, connect one thru a USB port.
Once you have upgrade unzipped to the sd card, put card into the M80 and switch the camera to the "aim" position....should show "upgrade NO"..press up/down key to change to "yes"; press enter and wait...DO NOT TURN OFF CAMERA AND USE NEW BATTERIES...camera will turn itself off when done.Power on camera and test it out.This has solve the trail err and a few other issues with the M80.

I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!

Your Bushnell Trail Sentry 11-9200 may need to be reset. Reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place.

If you lost your manual, here is a pdf copy.

For more information on digital trail cameras, read my Hunting Blog.

Here is a Bushnell Trail Sentry 11-9200 manual in case you lost yours.

To reset it, pull one of the batteries out partway, insert a new or empty SD card, and put the battery back in place.

Read my Hunting Blog for industry information and a good buying source for your next Trail Camera.

If the Bushnell Trail Sentry 11-9200 is turned on without an SD card in place, it may need to be reset. Reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. Read this Set Up Guide for instruction how to set up your passcode.

If you are looking for a replacement trail camera, or you want to buy another, go to my Hunting Supplies Website and browse through the different name brands offered for sale here. http://hunting-supplies-net.com/