Remote control codes

The Onkyo RC-649M remote was included with the Onkyo HT-S790 (with the HT-R540 receiver), among other sound systems. The directions for using this remote are thus in the HT-S790 manual. Onkyo has this manual here: https://www.intl.onkyo.com/downloads/manuals/pdf/ht-s790_manual_e.pdf . See pages 13-17 for information on using the remote. Look at page 69 and the subsequent pages for the remote control programming directions and code list. To program the remote for a specific device, press and hold the Mode button (TV, DVD, etc) that you want to program. While holding this mode button, press and hold the Display button (the lowest button on the left side of the remote) for 3 seconds. Then enter the 4 digit code that applies for your device/manufacturer. (If there are multiple codes, you will need to test the remote and try again until you find a code that works.)

I hope this helps.

Cindy Wells

You should indicate you remote.
In any case, if code is not in your remote you should follow indications for No code
If you don't have a manual, look for one using google,and terms manual, make and model of your remote

Hi Javier, you can located the owners manual at the following link, http://www.onkyousa.com/Downloads/manuals.php?source=globalnav. Note that your unit is part of the HTIB HT-S780, Thanks, JT

get and hdmi cord

Unfortunately, Insignia can't provide a code. We recommend using your universal remote control's scan/learning feature to find a compatible code.

If the system uses a remote control, you may need to adjust the subwoofer out signal setting or turn on the sub in a menu, and on many systems, you can only access those settings via a remote control (you should check the onkyo user manual on how to do it).

Now, this is just one suggestion, it may work, but then again, it may not.

These could also be connection problems or some internal trouble in the onkyo sub signal output section or in the subwoofer input section, but hopefuly, it's just a "turn on" or "signal level" setting in a menu.

Good luck

3rq8 (triarcuate)

The Harmony universal remote is on clearance at my local Radio shack for $37. Normally $100. Great remote.

Code that I have for sky + is: 01175. There are several other codes for other versions of sky boxes if you think you may need them but that should be the one.

Samsung has a huge code list: 10017, 10037, 10047, 10054, 10056, 10060, 10090, 10092, 10093, 10154, 10156, 10178, 10226, 10702, 10766, 10814, 11060, 11235. Unfortunatly you'll just have to try them one at a time until you find one that works. Hope this helps.

If your remote has a "search" feature (most do), you might find a code that works using that. Remote manufactures can't seem to keep up with all the model and codes comiing out each year...

Hope that fixed ya...

Geno

Go to Onkyo's website http://www.onkyousa.com/. rest the cursor over the support button at the top of the page. Adrop down menu will appear. Select owner's manuals. Select receivers on the new page. Select the manual for your model (HT-R530). It is a PDF file. At the bottom of the manual will be a section about the remote with the codes.

Cheers