How do I fix my shark Vac then Steam if it won't heat up or steam?

Question edited for clarity and proper 'make model' as written in manual.

Return the machine to Shark for free replacement under lifetime warranty.

https://www.google.com/search?q=Shark+Vac+steam+MV2010

..

im not familiar with that brand but i am an electrician and vac tech. i would if i were you i would check and make sure the heating element had power at its connection. if there is power replace the heating element. plenty of online vac parts stores have schematics along with a parts list to help you locate part in vacuum.

http://www.sharkclean.com/manual/MV2010_11_IB_ENG_110103.pdf

sounds like it's clogged again

HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL "SHARK 3" MUCH BETTER

If this is new and returnable then I recommend an exchange. If not possible check to see if the vacuum has an internal fuse on this model. If not, use a voltage tester and test power to and from power switch and to the motor itself.

Replacement parts can be found on amazon, take a look: Amazon com shark vac parts . Have a nice day

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101



,.,.

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101


zsd