What is remote control code for 42 inch vizio tv with phillips universal remote

Nobody buys universal remotes these days, they are so 1980. You buy a Facsimile Remote, an exact copy of the original.

replacement remotes

https://www.google.com/search?q=Vizio+tv+e500ar+replacement+remote

There are far TOOOO many codes for Vizio!

https://codesforuniversalremotes.com/remote-control-codes-vizio-tvs/

..

Universal remote code to check with Vizio TV is [0081.
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. If you want to get more details and codes to different remote controls, check this.

There is no setup code for Philips remote with Vizio TV> Anyway, check this code. Good Luck.
{0081}

Please give me the brand/model of the universal remote control please. The codes differ from brand to brand of universal remote control. The RCA ones differ from the Philips ones and etc. I need that information to provide you a solution. Thank you.

A remote is not designed to control and Moitor. They only run by the video/sound output from the pc. So I am taking it for granted that you meant TV instead of Monitor.

A. Before buying a new remote try replacing the batteries first.

B. I found the Innovage Jumbo Remote Control manual and it has no code for the Vizio TV, you will need to utilize the remote's "Code Search" option.

C. Instructions

1. Turn on the Vizio TV.
2. Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3. Press the "TV" button at the top of the Jumbo Universal Remote.
4. Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. This will likely take several minutes due to the amount of available codes.
5. Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6. Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Good luck.

Hi

Im not sure if this is the correct phillips remote.

I assume you know how to input the code?

This should be the one for your Vizio TV - - > 709

Here is a PDF page with all the information on how to input the code and what you can do if it doesnt work.

http://www.remotecodelist.com/remotes/philips/PM335_Codes.pdf

You could do a code search which will go through about 300 different codes until it finds one that works with your TV.

I hope this helps

Mike

Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

I have a 37 inch vizio and had the same problem. After a little web research, I came across a suggestion that the LG codes might work. I tried it and found that the code 19 worked. You might try that. If 19 doesn't work for you, one of the other LG codes might (they are 06, 21, 22, 23 or 78).

onkyo rc 518m find