My problem is that all my pictures are all black and can't see anything at all through the screen. It takes pictures all right but they just show up as all black. The power comes on and lens opens as usual, everything else works fine.
SOURCE: Review windows is black, pictures are black
A stuck shutter is a common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open).
To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see the following for further info and a simple fix that may help:
http://camerarepair.blogspot.com/2009/05/simple-fix-for-stuck-shutter.html
SOURCE: When I push the button to take pictures, everything goes black
CCD Failure !
Just call Fuji they will do it FREE OF CHARGE dont worry just call them and tell them about BAD CCD PROBLEM
see this thousands have same problem
PLS RATE ME WELL !!
http://www.imaging-resource.com/badccds.html
www.fujifilm.com
786 views
Usually answered in minutes!
I have the exact same problem....exactly. Except my camera is a Canon Powershot A300.
×