Model #14812220
This should be most of the Kenmore sewing machine manuals.
010
1020
1030
1040
1045
1050
1206
1230
1232
1240
1250
1300
1357
1430
1431
15/I649
15243
15343
15358
1625
1641
1660
17920
17921
17922
1940
1941
1947
19501
19502
200
38
385.17622
385.19000
385.101118
385.115518
385.11607
385.11703
385.12614
385.15202
385.15208
385.15243
385.15343
385.15358
385.15408
385.15512
385.15516
385.160201
385.16120200
385.162213
385.166551
385.16677
385.16765
385.19005
385.19365
519
ELITE
14
1500
15218
15616
15718
1600
1650
1651
1652
1654
1750
1791
18
385
385.17620
385.17624
385.17630
385.1 521 2
385.115418
385.12314
385.151082
385.15358
385.161302
385.19005
68
95
96
SWA/RS 10101
SWA/RS 11101
SWA/RS 12551
SWA/RS 12621
SWA/RS 14401
SWA/RS 14501
SWA/RS 14502
SWA/RS 14571
SWA/RS 14572
SOURCE: Kenmore Sewing Machine model # c877.15
I have an old Kenmore and here are the directions from my manual: 1. Draw thread from spool through bobbin winder tension discs. 2. Wind thread around an empty bobbin several times. 3. Place bobbin onto bobbin winder shaft with thread coming from rear of bobbin. Push bobbin winder latch against bobbin until it clicks. 4. Release clutch by turning clutch knob toward you. Start machine.
SOURCE: Kenmore sewing machine manual for model # 148 12080. (older)
i have a older kenmore sewing machine model #148.19370
SOURCE: kenmore sewing machine model 385 16764
There's a website called managemyhome.com which is sponsored by Sears. It's free to join. Go to the Home Manager column and choose Owner's Manuals from the drop down menu.
You can type in the brand name (Kenmore) and model number of your machine. Not all of them are in there but, I did find the one for the 1950280 question. It's a pdf file.
For the 38516764 question, please double check your model number. I received either no response or a Kenmore Elite dishwasher manual in response to my query.
I've been looking too and I found here http://sewing.patternreview.com/cgi-bin/sewingclasses/board.pl?t=18328that you need to put the bar behind the needle threader down. I think they call it a button hole stop? I don't know, but it worked. I didn't even know it existed. But it solved my problem. On my Kenmore it looks like a black lever and you pull it down. It tells the button-holer that you are at the end of the hole and it needs to backup. nifty, kind of.
272 views
Usually answered in minutes!
×