Do not know if the above "Architect #" is correct. Model # KEBC208K9T04 Serial # XT0418231
SOURCE: Kitchen Aid Superba Dishwasher
mix "CLR" (at stores) with water, pour it in, turn on diswasher (nothing in the machine) then stop it in the middle of first cycle before it drains. The "CLR" will get rid of calcium deposits that are clogging machine. I stopped my dishwasher for a few hours to let "CLR" work. This worked for me.
SOURCE: NO WATER IN ICE MAKER
From what you've described, it sounds like you have a defective inlet water-valve.
I would remove your outside rear bottom panel; disconnect the 2 prong wires connected to your ice-maker water valve (blue with black solenoids) and check for continuity using an ohm-meter setting. If defective, replace. Whats' your model #?
SOURCE: compressor runs continuously, and center bar (heat dissipator) is extremely hot to touch.
Molly, The hot bar is a normal part of the sealed system (compressor) operation. The relay they told you about is on the back of the compressor and I would not recommend you changing that. The refrigerator is a balanced system, the freezer air removes the heat from the refrigerator side. If the compressor runs all the time, look for food close to the edge and not letting the doors close completely. Move items back. Don't over pack the freezer, the air must circulate. The refrigerator of today runs longer and uses less power that the old refrigerator. If you are still having issues with this model call a authorized Kitchen repair person in you area and ask how much they charge to come to your house and give an estimate.
416 views
Usually answered in minutes!
×