Why am I getting me black pictures at night and some good pics

IR/ night vision, Black and white also seem to work good most of the time too. Just keep playing around until you find one that suites your needs. Happy refraction !!!!.

Take no more pics until you've recovered your photos, take the card out of the camera. This is to reduce the chance of you overwriting some of your "lost" photos. There are many good freeware photo recovery software options that may help you recover your photos. This article reviews and outlines several of the better ones:

D40s are well known for flash failures...in 3-shot burst mode, due to charge time of flash circuit, 1st pic good; next 2 black. Battery life greatly reduced in this mode.

This is happening due to your wrong settings..
So first you rest your camera to factory defaults... and confirmed that night mode is off for daylight picture...
Take photo on Auto mode... and see the result.... If still not satisfied then camera get serviced...

It can only nuber from 1 to whatever or next number to whatever you already have. Each time you transfer the pics to ypur PC, it delets the ones that have been sent, so it is left with none and hence the name of the next pic would be one. Only solution is if you can configure to name the pics based on date. That way, you will have different names each day. I am sure you have this provision in your camera.

number1 be sure that you,re using energizer lithium batteries only.they,re the best.2 because these cameras have such a small flash and its placed in the front of the camera instead of the top,they,re not really made for night shots.but from 3-5ft you should get great pics at very low light.just put it on auto,and ignore the low light message,press down and hold for 2seconds then release.you should get great pictures this way.good luck,hope i helped

Unfortunately your CCD chip has failed. Ifyou want to repair it, then you would need a new one.
Fujitsu is not selling them,and never have been.

A common fault with this camera (certain serial numbers)

germander

try to change the settings of your camera, set it to highest picture quality. Also light settings make abig difference to digital cameras. They can click excellent pics in daylight but suffer in the nighttime. You can use the night mode settings to take pics at night to solve this problem to sme extent.
I am one of the extremely satisfied users of the nokia 6233 phone and it's camera, I have clicked some awsome pics using it.

RK.

If you cannot find a solution to your problem you may want to email [email protected]. He has good advice and good used parts at a fair price.

The first thing you need to determine.... Is it your or the camera? You need to take a series of shots with your camera sitting on a tripod. If you do not have a tripod, sit the camera on a solid surface. ................... Camera movement is the number one cause of blurred photos. A few tips: 1. When you punch down the shutter button ... that can move the camera just as the picture is taken. Dont ''punch'' down the shutter button. Hold the camera in such a manner that you are squeezing the shutter button between your forefinger and thumb. 2. When you are using the LCD to frame the shot, you have your arms extended in front of you. This invites camera movement. Instead, use the viewfinder and make sure that the camera is pressed against your face. Your head is steadier that two outstreatched arms. For added stability, lean your shoulder against a pole, tree, building, or other solid object. 3. When taking flash pictures remember, that flash only covers so much area. The CX7530 is rated for 11.8 feet if you are not using optical zoom. It is rated for only 6.9 feet if you are using optical zoom. If your subject(s) are beyond those distances, you will get a dark photo. 4. When shooting in dim light and not using flash, the camera will select a slow shutter speed. You must use a tripod or sit the camera on a solid surface.