The volume controls on both my remote and my Philips flat HDTV 37PF7320A 37." How do I fix it?

This is an easy fix using the Philips remote control that came with your tv. On the center of the remote is a dial that has left right up down controls. Stand in front of the tv and using those controls you can recenter the screen and get rid fo the green line. I had same problem when we hooked up hd satellite reciver to philips 37 plasma

If that TV has a 'menu' button on the front of the set, make sure nothing like coca-cola has spilled into where that switch is located. I would try a different remote in case the remote is getting flaky....

you can usually get a universal remote from most shops or on ebay if you want a original replacement try ebay again or from phillips website/ring them or a supplier

download owners manual for free to help with this problem

hi!you can get the manual at http://www.retrevo.com/support/Philips-37PF7320A-TVs-manual/id/278ci358/t/2/
you may  have to make a fast and free registration..
hope u get ur TV working fast!
regards!hope i could help you..

Philips 37PF7320A 37 no power but the green light is on

I had this exact same problem. After a week or so it started responding to the remote control again. Then after a couple of days it stopped responding. This problem came and went for about a month, then one day the entire TV went dead. When I powered it on, the green light appeared for 2 seconds followed by a sequence of 6 flashing red lights that repeated. I brought my set in to a repair shop and they replaced the power supply board. That fixed the problem and now the TV powers up and responds to the remote control again. Total charge was $250. That was very disappointing for a $1,500 TV that was only 18 months old. I'm going to let Philips know how disappointed I am in their product!

If the remote has been replaced the IR receiver could be bad. Try changing the channels with by the tv. Most likely that is the problem.Beside that the small signal board could be an issue. But I would the IR receiver would be first.

Hey. I paid the $20 for the expert advice and (I feel such a fool) I just had to unplug the tv and plug it in again for everything to work!

Martin000

Yes,you are correct.