Jacuzzi has power but does not work panel has three bars instead of tempeture reading any suggestions

Maybe these folks can help they stock allot of Jacuzzi parts.

Can't Find It?

Send us a picture
Text a photo: 305-321-3420

https://www.guillens.com/catalog/shop/Jacuzzi/Bath/Repair-Parts/Control-Boxes/mfr-3BU?pagenum=1

check ur air flow control knob and or ur cold or tempeture control thermostat, sometimes the air flow vent is closed or open to far one way? also check to see if fan in freezer is working?

The knobs on the jacuzzi whirlpool pull off.

US Parts Center

Pull off all three knobs and then the plastic graphic rings and you will find 2 screws under each. After removing the screws the whole plate can pop off. If your problem is anything like mine, your air pump is full of water and needs to be replaced. After removing all the screws you can carefully pry it up with a thin tool, it is most likely caulked to the tub. You can find replacement parts and names for it here:

http://www.guillens.com/index.jsp?path=product&part=124772&ds=dept&process=search&text=JAC%20%20G107XXX

Hope that helps

Check for any GFIC receptacles in line some where tripped out. Check breaker and make sure it's working properly.

Hi....did you ever find and answer to this? mine is doing the same thing? I need help--wondering what you did to fix. thank!

I would expect there is a Jacuzzi dealer in your town and I would guess he has parts. If you purchase parts locally, not only are you helping your neighbor but also, you will have the opportunity to pick his brain on tips to install.

Thanks for your interest in FixYa.com.

Only three posible problems. High is out on pump. Spa side control is out. Control box relay that runs high pump is out.Does upper controls(spa side) read out a code? Kirk