How to make the oven work?

This is a strong indicator the magnetron has failed "heats food" and is the heart of the system. If microwave oven is a few years old better to invest in new.

if the oven is working only the light problme. it is okey but if you really want light you can simply change the bulb of the oven in eletrconic nearby you. thankyou.

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

fjfh

Hi, my living room light has stopped working, When i turned it on one of the little bulbs went pop and light stopped working although all electric and other lights still work. I tried the bulb in a different light and it still works as well?? I also took light off to check for loose wiring etc but all seems to be fine. Can you help? Thanks!

You need to replace the internal light, that usually can fix the problem.

If replacing the bulb does not work, check the wiring to the light.

You can find the spare light and diagrams for your oven by entering model number here.

Then you have bad light socket or some broken wire to this socket.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

The light bulb already works, so this isn't the problem.

The following is generic to most microwave ovens for the light:

Inside all microwave ovens there are sensor and safety switches that work with the door. There are also some electronics on the controler board or a daughter board that control the light. The fault would most likely be in those areas. Some models have a door switch that is specificaly for the light.

The service tech would start by testing all the sensor and safety switches. If these, the wireing, and the connectors are all okay, he would then verify the operation of the circuits for the light.


Jerry G.

Please, Can somebody tell me where can I get one of this oven??? Thanks Andy

The problem is almost certainly on the control panel, which we repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inopoerable or stuck on.

If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and

disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk