Kitchen Ranges Logo

Related Topics:

A
Anonymous Posted on Aug 29, 2014

<!-- from fixya rte -->Rangemaster vent filter 04319250 - Rangemaster Kitchen Ranges

1 Related Answer

Anonymous

  • 244 Answers
  • Posted on Feb 12, 2009

SOURCE: Find a replacement filter for older model Rangemaster hood/vent

tru appliance parts site like repairclinic.com

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i reset filter light on rangemaster fridge rsxs661

To reset the filter light on a Rangemaster fridge RSXS661, please follow the steps below:
  1. Press and hold the Filter Reset button for 3 seconds. The Filter Reset button is located on the control panel of the fridge.
  2. Hold the button until the light on the control panel changes from red to green.
  3. Release the button.
The filter light should now be reset. If you have any further questions or concerns, please refer to the user manual or contact Rangemaster customer support for assistance.
1helpful
1answer

My fans in my Rangemaster 90 cooker hood are not turning but you can here the power going to them

Parts Schematic in the User Guide shows where the screws are. After removing the filter, you should see the fan. The filters are supposed to stop grease getting to the fan.
https://www.rangemaster.co.uk/sites/default/files/user_guides_uploaded/991.0388.012_ver5.pdf

There is a generic video on replacing a fan.

https://www.google.com/search?q=Rangemaster+90+%22cooker+hood%22+replace+fan

..
0helpful
1answer

Rangemaster part 2995 A119

Hi Gerald,

for old Rangemasters it is difficult to find the original parts, as they have their outside model.
But when you open the switch carefully, you will find 2 switches on a board, one for the light and one for the fan.
These parts are common for a lot of cooker hoods. The switches look like the one of link 1
Genuine Creda CRV10W Light Bulb Switch Cooker Hood eBay

the second link gives you a complete unit, so the light switch and the vent switch on a board

https://shop.ukwhitegoods.co.uk/08086215-hygena-cooker-extractor-hood-switch-pcb

I hope you will find the right part.
Kind regards, Dik
0helpful
1answer

I have one not vented out side is that normal? It has slits on both sides.

Please check your manual as many hoods can be recirculating, if this is the case then you should also make sure you have a charcoal filter fitted.
0helpful
1answer

We are going to fit a rangemaster hood venting outside and the builder needs to know where to have the exit hole from the hood. Can you tell me how far up the hood the exit is situated

The bottom of the hood should be atleast 750mm from the top of a gas burner. Measure up from this atleast 450mm for your hole to be drilled.
2helpful
2answers

Want to use without outside vent

sometimes rangemaster hoods have a filter system. check with them if your model does this. nuber for tech help by them on internet.
0helpful
1answer
0helpful
1answer

Replacement filters for rangemaster kitchen hood model 109-25

rangemaster have a good tech help desk. they also can advise of suppliers. in your area.
Not finding what you are looking for?

208 views

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...