Why does my miolta dimage have a blank screen?

Fuser Error. Could be fuser or bad power.

Hold down [Utility/Counter] while turning the main switch on. Press [Reset] on the touch screen, and turn main sw. off/on.

May need firmware and/or software switch setting in service mode.

Change software setting. Service Mode System 2 Software Switch Setting
switch no: 50
bit assignment: 00000001
hex assignment: 01

Check that is not the shutter that is stuck

Yipes - seems that electronics have developed a nind of their own. Check with the manufacturer, if manual has no mention, of a reset switch or hidden code that will reset unit to factory defaults. Cross your fingers.

are ur pics black if u see them on pc then

this is a BAD CCD problem thousands are facing dont worry konica will do it free of charge even if u are out of warranty and not on list, just call or contact KONICA see this PLS RATE ME FIXYAfor help

http://www.konicaminoltasupport.com/English.importantnotice_en.0.html

go for free repairs CCD failure pls rate me FIXYA for help

http://www.konicaminoltasupport.com/English.importantnotice_en.0.html?&L=0

This sounds like a defective Sony CCD issue. If so, Sony will fix your Minolta camera for free (with free shipping) regardless of warranty. You need to do this before March 31, 2008 so get going! See this link:
http://camerarepair.blogspot.com/2007/11/sony-konica-minolta-cameras.html

The Dimage models that Sony is accepting for the recall repair are:
Dimage 7HI, 7I, A1, Xi, F300, XT, X20, S414.

You both are in luck. This sounds like a defective Sony CCD issue. Sony will fix your Minolta camera for free (with free shipping) regardless of warranty. You need to do this before March 31, 2008 so get going! See this link:
http://esupport.sony.com/US/perl/news-item.pl?template_id=1&news_id=131#
The Dimage models that Sony is accepting for the recall repair are:
Dimage 7HI, 7I, A1, Xi, F300, XT, X20, S414.

Of course this problem can be fixed but only temporarily..This is the main problem with LCD screen displays.Either you replace the screen and use it for the time being or sell it off before the liquid leaks out completely.

This sounds like a defective Sony CCD issue. If so, Sony will fix your Minolta camera for free (with free shipping) regardless of warranty. You need to do this before March 31, 2008 so get going! See this link:
http://esupport.sony.com/US/perl/news-item.pl?template_id=1&news_id=131#
The Dimage models that Sony is accepting for the recall repair are:
Dimage 7HI, 7I, A1, Xi, F300, XT, X20, S414.

Maybe the CCD imager is dead. Please contact your nearest Sony Service. If you need more info please advice