Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

A
Anonymous Posted on Aug 26, 2014

<!-- from fixya rte -->My tv picture looks curved - Sony KP-51HW40 51" Rear Projection Television

1 Related Answer

Anonymous

  • 3459 Answers
  • Posted on Feb 05, 2009

SOURCE: picture looks curved (concave curve) on my sony KP-46WT510

You may have a convergence problem. Here are some of the most common symptoms and example photos.

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The picture looks 3D and kind of curving in

The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have pictures colors shadows or have a 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.
0helpful
1answer

I have a Samsung HL-T5676S DLP TV and the picture just recently started to look curved. In the middle of the screen it's straight but on the sides it starts to curve up. Any idea of what could be causing...

make sure you do not have anything sitting on the top of this tv. I have seen this on my tv by just gently putting pressure with my finger on top the screen starts to curve up at the edges.
0helpful
1answer

Green channel looks curved

my tv looks like a 3D picture! it has a double image and a the outside of the picture starts to curve
0helpful
1answer

SONY PROJECTION TV MODEL # KP-51WS510.

If the entire screen is curved, and it is not taking the whole screen, then you have a vertical deflection problem.

If the colors are double and do not match, with lines of different colors around pictures , then you have a convergence problem, often caused by a faulty convergence board.

The curving effect can be a side effect of bad convergence, or you may have both problems at once.

Unless you are a TV repairer yourself, better calling technical support. Usually you can ring the number listed on the owner manual.
0helpful
1answer

Curved picture at top and bottom

if it is bowing from top and bottom your looking at a convergance problem if you keep using your tv soon there will be no picture at all when the board crashes... convergance board needs to be replaced... hope this helps..
0helpful
2answers

Picture is multi color, double shadows, curved

This is failure of convergence out ICs in TV. Qualified TV tech will replace convergence out ICs or board.
0helpful
1answer

Distorted picture on RCA LCD TV

it can be replaced with a t0220 stile case dioded 220k ohm go to nte look up and do a search on the rca part #moz-screenshot.jpg 259638 search the web for the part.
0helpful
1answer

Screen is curved inward on all 4 sides and there is a red, and a blue line that is curved at the top of the screen

This is a convergence problem.. possible deflection problem... you might need a tech to look at it...
2helpful
1answer

3 curved lines top & bottom/blurred picture

This indicates a convergence problem..convergence power supply probally.. however ive seen 2 other cuicits cause this ..
0helpful
1answer

Rca 52 inch keeps shutting off and picture is curved

The curved picture indicates failing parts in the pin amp section and probably some faulty parts in the scan amplifier sections. The set is being turned off by the uPC because there is a fault indicated, and it is going in to protect mode.

The set will have to be properly serviced.

Jerry G.
Not finding what you are looking for?

130 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...