How do i restring a honda weed trimmer? - Husqvarna Weed Trimmer 224 L 4-stroke Line Edger Trimmer Honda Engine Husky

Demonstrated on a Worx String Trimmer - YouTube

? 3:55
www.youtube.com/watch?v=fFt3a3St54U
Jul 9, 2014 - Uploaded by EricL5150
This is a video on how to replace weed wacker string trimmer line in a string trimmer/weed wacker. ... This is done on a Worx string trimmer but the process is pretty much the .... How torestring dual-sided spool lawn weed eater trimmer with ... Worx56volt Cordless Trimmer Edger Review & Demo Video ...

Make a sharp bend in the line and insert it into the hole in the spool hub. Start wrapping the replacement line in the direction shown on the spool.

This WEB site shows how to replace the nylon line.
http://www.youtube.com/watch?v=to_DQP-XY0M

To remove the head to restring, push in the bumper cap/side tabs on the strimmer head, the top should then just pull off exposing the inner spool.

On the directions below tells you how to restring the spool.



If you can not read it you can click on the link below to download the manual.

http://manuals.mtdproducts.com/mtd/GetFile.do?filename=769-04481.pdf

If you have any questions please ask befor you rate.

Good Luck

Usually one get a a spool of the cutting wire and it snaps into place.
http://flymolawnmower.co.cc/reviews-Toro_Electric_Trimmer_Replacement_Spool_with_065_Inch_by_10_Foot_Line_88185-B00005V7KY.html
Shows you also how to do it on package.

how to restring a poulan weed eater

Hi
check the following link
The idea is the same for all trimmers
http://www.youtube.com/watch?v=WFu66Q6J62Q

good luck

you need to locate the black knob at the trimmer head and turn it coun ter clockwise and remove it to access your string spool you may have to chase the knob with pliers because some are more than hand tight
follow arrow on the spool for line winding direction

I just assume you used stronger line on an autofeed string trimmer.