Have forgotten NetKey password to add laptop to wireless network

Use an Ethernet cable to connect a computer (desktop/laptop) to one of the "wired' ports on the router.

Connect to the built-in web-server "inside" the router.

Run the "Wireless Networking Setup Wizard", to configure the wireless capabilities of the router; assign an SSID, and assign a password for the wireless network.

You can secure your wireless network wit WEP or WAP code.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
For belkin router http://192.168.15.1
or
http://192.168.2.1

If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on wireless settings then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Thanks for using FixYa.

what do you mean by netkey? Usually, you just need to know the password to the router and then you can know connect to it.

Put a direct line into the router and open an internet window. In the search bar type 192.168.0.1 and it should take you inside your router. you can see your password there

go to 192.168.2.1 >wireless security page. There you will see your old key. Erase it and type in your new key. It is going to ask you for the password if you have set one. If you have not set one, leave it blank and press submit.
If I could be of further assistance, let me know.
If this solves your issue, please be kind to rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi,

If you are using windows xp :

Go to Start>control panel> Network and internet> network connections > right click on wireless network > select 'view available wireless networks' and select your home network and click connect. If it asks for a password i guess u have it or if u dont have then go to Internet Explorerand and type 192.168.1.1 in the address bar, it will ask for a username and a password, type admin as username and the same for password. it will take you to the lynksys page....then select wireless and click wireless security, it will show you the wireless password.......

If u have windows vista :

Click Start > go to 'connect to' > select the wireless network you want to connect to and the rest is the same as windows xp....


Hope this works out

Regards,
Anup

Try (admin) for your password and see if that works for you. Good luck.

please follow the following steps:
1) Click Start > run > cmd > ipconfig (enter) and note down the Deafult gateway should be some numbers like 192.168.1.1 etc 2) Open internet explorer and type those numbers in the address bar and press enter 3) now you will get the router page, login with following details username: admin password: admin or password 4) and in wireless settings you can find the password (WEP) to connect the IPhone

just try reset in your linksys and reinstall once again the driver for it in both your laptop and set a password for it .....

Access your wireless router by typing it's ip address in your browser. Log in and change your netkey password.