Epson Expression XP-305 Inkjet Multifunction Printer - Colour - Photo/ Logo
A
Anonymous Posted on Aug 08, 2014

Epson xp 305 help

Black would not print. Epson saidtry head cleaning and nozzle check - black prints now pink and blue don't. Although, think it may have used the pink n blue but not the black n yellow - is the ink cartridge or printer to blame and how do I fix this?

1 Answer

burneymeyer

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 13 Answers
  • Posted on Aug 11, 2014
burneymeyer
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Dec 08, 2009
Answers
13
Questions
0
Helped
5015
Points
20

It's quite likely that at some point in time you will have attempted to print in black only to receive an error message that you cannot print until a colour cartridge is replaced.
"If ink is not in the tubes from the head to the cartridge, air will be sucked in and therefore cause damage to the print head. This is because the nozzles are in the print head and not in the cartridge. "
What Epson are basically saying is... if this safeguard was not in place, and you sent a print request for black when a colour cartridge was empty, there is a risk of air being pulled into the printhead. This air will ruin the vacuum effect needed for the printhead to pull ink in, meaning your printhead would be at risk of never printing again.
Additionally, if any air is allowed go get into the aformentioned tubes from the head to the cartridge, any remaining ink will coagulate. Just in case you're not a scientist - coagulation in a tube/cartridge is bad, and will lead to you not being able to print again with that cartridge, or to a blocked nozzle/printhead which will require a significant amount of cleaning cycles to budge.

5 Related Answers

Soulvisitor

Soulvisitor

  • 1113 Answers
  • Posted on Nov 04, 2007

SOURCE: Epson STYLUS CX3900 Black colour not printing

Are you using gen. epson cart? If not then try that first.

Sounds like you have a block black print head there are many posts on that subject.

Ad

Anonymous

  • 10 Answers
  • Posted on Jan 01, 2009

SOURCE: epson CX3650 printing gaps

Remove ink cartridges one by one and put it back in. If same thing happens, try to do head cleaning and nozzle checks consecutively from the computer.

Start -> Control Panel -> Printers & Faxes (Windows XP) / Printers (Windows Vista) -> Printer Icon (right click) -> Printing Preferences -> Maintenance

You should be able to see nozzle check, click it and follow the prompt. Line patterns that corresponds to the colors of the ink cartridges would be printed. If breaks on the patterns appear, continue with head cleaning. Try to do this about 3 times until all patterns are complete.

Alun Cox

  • 2679 Answers
  • Posted on Jun 19, 2009

SOURCE: printer will not print in black ink. Epson stylus color 400

Try cleaning the print heads.

Anonymous

  • 677 Answers
  • Posted on Apr 05, 2010

SOURCE: How to clean my Epson RX595 Photo All In One

Did you use Epson Genuine Cartridges?
ALL…. Epson & Brother Requires Genuine Cartridges. !!!!!!!!
That sounds like your problem.

In Purchasing Epson's CX 5400, CX4600, & CX7400 and more, I found out that Epson does not like Generic Printer Cartridges. I also Purchased a Brother MFC-240C All-In-One InkJet Printer. That also does not like Generic Print Cartridges. Color that should be Yellow, will turn out Green, Blue Brown, etc.

These printers have a CHIP that will detect if it is Generic or Genuine. When they see it’s Generic Cartridges, it will print lines thru the words, stripes across the picture and also do a mix match with the colors. It also will not let you print anything, if only one of the cartridges is empty.

I wanted to print only Black, and would not let me, because I did not have any ink in one of my cyan cartridges. Go figure.

That's what these Companies do., so they can keep selling the ink cartridges. Some Printers, are able to use Generic, and some are refillable. Some you can refill them up yourself and I heard, quite MESSY.

So I learned, thru trial and error, that you must use the ORIGINAL Genuine Cartridges for these PRINTERS. Some people say some models work fine compatible, but not mine.......


I had to replace the printer, but Epson, Lexmark & Brothers are always on sale. My Brother & Epson cost me $50.00 with Rebate. .


IF YOU ARE USING GENERIC CARTRIDGES, MAYBE IT WOULD BE BETTER IF YOU DISABLE THE INK MONITOR.

This is the only advice I can give you.


The next step would be to disassemble the Epson, and clean the Pads/Heads. Click on link below.:
http://www.hm2k.com/posts/parts-inside-your-printer-are-at-the-end-of-their-service-life

I located a page on http://www.fixyourownprinter.com forum, which had plenty of details about similar issues.

If you find this helpful, pls rate me.

Thanks and Good Luck :0)

Anonymous

  • 2 Answers
  • Posted on Apr 12, 2010

SOURCE: Epson Stylus CX7400 Black ink won't print

You are a ******* and I WILL NEVER BUY A PIECE OF **** EPSON AGAIN...THESE PRINTERS ****

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Cant get my Epson Workforce 633 to print. WILL NOT print black.

check if ink came out of the head or nozzles if not then first open the nozzles and head with warm water.
1helpful
1answer

Epson workforce 545 is printing & coping blank

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.
0helpful
1answer

Epson C88 3/16" gap every inch printing black text

Reload the printer drivers, you can get this from the manufacturers web site under support or downloads.
its a common error and an easy fix.
good luck !
0helpful
1answer

My Epson CX4200 is printing pink pictures - help!

try printing the nozzle check page.. you will be able to see which color that is missing... it should have Yellow , Megenta, Cyan and Black... if any one of the color is missing.. try performing head cleaning and after twice cleaning and still no improvement, very high possibility your print head is clogged..
0helpful
1answer

My Epson Stylus C88+ printer won't print

Sounds like there's a problem with the print head. I'd recommend doing a nozzle check, if any colours are missing from the print out then try some head cleans. You can find the nozzle check and head clean options in the maintenance/utility tab of your printer driver.
0helpful
1answer

Replacing Blue Ink cartridge

The nozzle check takes very little ink it sounds as though you need to do a head clen though.
0helpful
3answers

Unable to clean Epson C88 Nozzle

In view of leke0513's lack of interest in this problem, I think we may say it has been "solved by poster".
4helpful
3answers

Epson CX3650 printing gaps

Remove ink cartridges one by one and put it back in. If same thing happens, try to do head cleaning and nozzle checks consecutively from the computer.

Start -> Control Panel -> Printers & Faxes (Windows XP) / Printers (Windows Vista) -> Printer Icon (right click) -> Printing Preferences -> Maintenance

You should be able to see nozzle check, click it and follow the prompt. Line patterns that corresponds to the colors of the ink cartridges would be printed. If breaks on the patterns appear, continue with head cleaning. Try to do this about 3 times until all patterns are complete.
2helpful
2answers

Printer refuses to print black

Hi, I have question?
The ink that yuo are change are original epson cartidge ink?If yes , try to head cleaning twice and then nozzle check ,then the result of test print are soild in color are good , the unclean head having plenty spaces within the color in test print.
Not finding what you are looking for?

299 views

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

NH TECH

Level 1 Expert

17 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...