How to get audio on Phillips blu ray - Philips Blu-ray Disc Player with Wi-Fi - Black BDP2105/F7

Make sure your Blu-Ray player is connected to the Internet.

Open your Blu-ray player menu. Locate and select the "YouTube" app. Many Internet-ready Blu-ray players come with a YouTube app already installed on theplayer. With some Blu-ray players, however, you may be required to install theYouTube app on your player.

Hi, maybe you can try another free one like Leawo Blu-ray Player.

Leawo Blu-ray Player is all-inclusive media player software to play back Blu-ray/DVD disc, common videos and up to 1080P HD videos smoothly on Windows 8. As professional Blu-ray/DVD media player software, Leawo Blu-ray Player could play back the newest Blu-ray and DVD discs released in the market on Windows 8.1/8/7/Vista/XP. It could play back common videos, up to 1080P videos and audios in almost all formats with lossless quality. With various advanced audio decoding technologies like Dolby, DTS, AAC, TrueHD, DTS-HD, etc. built in, Leawo Blu-ray Player delivers extraordinary audio effect.

Hope it helps. :)

Best Free Blu ray Player Software for Windows Leawo Free Blu ray Player

hook your dvd player up to the tv via hdmi, then take the optical audio output from you tv to the soundbar. Make sure to enable to audio output jack in the tv setup menu as some manufacturers disable this jack by default.

Have you set up the TV/DVD in settings to use the correct cable?

most of the wi-fi conections built into blu ray players are crap & the dongles for them aren\'t any better, buy a long cable & hard wire it, mine works perfect this way.

program able remote will find the code

have you tried to connect the Philips direct to the TV's hdmi?

Could be the resolution on the bluray is set to 1080p which may be out of range for the receiver or even the TV for that matter. If you can reset the output resolution of the bluray to 480p first, just to establish a picture then try 720P which all HD tv's and receivers can handle.

I did a quick search and could not find the resolution reset procedure for this unit. Other units will reset if you press and hold 2 or more buttons together.

Hello there, the hdmi cable is a great way to get high definition video from a bluray player to a tv, but if the bluray player is part of a surround sound system you will need to get the sound to the tv separately. There is often a red and white audio terminal in the rear of the bluray player, sometimes located next to a yellow terminal, these are known as a component connection as each component (coloured terminal) is separate and operates a separate function, but all 3 connections can be used together to create a SCART equivalent. You may need to connect an 'Audio Component to 3.5mm jack' cable from the white and red terminals to the headphone/line in socket on the tv.

alternatively, as wilth my player, there is a button on the remote which switches the audio source from component, hdmi, SCART, etc, this may be the same for you.

hope this helps.