Image to large error message?

Free manual online with contact phone number to request assistance from the vendor.

https://images-na.ssl-images-amazon.com/images/I/91jDWBzE2US.pdf



https://images-na.ssl-images-amazon.com/images/I/91jDWBzE2US.pdf

Hi,
Googling to solve the same problem with a Power Shot G12, I found a manual under ManualOwl -- on p.194 it says:
"Communication error: images could not be transferred to the computer or printed due to the large amount of images (aprox. 1000) stored on the memory card. Use a commercially available USB card reader to transfer the images. Insert the memory into the printer's card slot to print."
This worked for me. Hope it does the same for you.

ugh sorry replace the toner hopper and all of the componets if a new iu dosnt fix the problem

Try taking any image, save then, see if the if you still get error message

C - 2651 Cyan imaging unit EEPROM acces error
C - 2652 Magenta imaging unit EEPROM acces error
C - 2653 Yellow imaging unit EEPROM acces error
C - 2654 Black imaging unit EEPROM acces error.
Clean the connection between the imaging unit and the machine if dirty.Reinstall imaging unit or change imaging unit.
Try reset:
Turn OFF the copier.
Press and keep pressed the Utility key and turn ON the copier.
Keep pressed the Utility key when the Trouble resest message is displayed.
Release the Utility key and touch the message and turn OFF the copier.Wait 1 minutes and turn ON.

This is a message that is given with a blue screen? If so then it is a Common error message for Missing NTLDR. Reinstall OS again.
What version of Windows and how far into the Restore are you getting to when you get this issue?
Also, it could be an issue with the restore image/files that you are using that is causing the problem.

Tell them to ry to send from another fax LINE and machine, so that you will know if the problem persist its problem in your line or machine.

Upon startup, one of the F keys, usually F4 through F8, will bring up a system repair screen, with a lot of options. Pick "Restore and Backup". Then Restore your computer to an earlier date. This will keep all your files and programs, and restore your registry and drivers to an earlier date when they worked. You probably got a virus, and this will get rid of it. Good luck, and hope this helps.

Make sure you have the latest software version. Current version you may check in About dialog under Help submenu and in the same submenu you wil find a function Live Update.
Also make sure you switch on the sewing machine either with the large hoop connected or without hoop. If sewing machine was switched on with the small hoop attached, it will provide this error message about wrong hoop.

This happens on monitors with a sleep type function. Make sure that the sleep mode is turned off and that it is set to never turn off inside of windows. Then the no signal error should not come on again.