Why a RCA model d52w23 wont stay on

Look if have not done so at flyback to see if broken solder connections around it.

sonny or JVC do not make the D52W23 thats strictlly an RCA model number

vvghostvv,

You could literally have anything wrong with your unit. RCA standard procedure is to try to start 3 times when there is a fault then lock the unit out. I have a tip at http://www.fixya.com/support/r6396176-projection_tv_troubleshooting which will walk you through the troubleshooting process as well as tell you where to get any parts you may need.

Thanks for using FixYa and for the great rating.

hardrocko

Some of those models were actually just big monitors without any on board tuners so They didnt have any need for coax cable inputs. You most likely have one of the monitors.

Go into the menu and you will find format settings.

The set is in shut down mode due to a fault detected in power supply/vertical or horizontal deflection circuits.
The common problems with this model that will cause the symptom you describe are bad power supply capacitors, bad flyback, bad HV cap in horizontal output circuit and cold solders especially under flyback area.
These are only the most common problems and it could be any number of other faults.
If you have electronic (TV) repair experience check the items mentioned, otherwise it's best to seek a qualified RCA tech for an estimate/service call.
Reply to this post if you need more advice.

Thats the CP150 cp114 and CP120 issue causing that. You can get the repair kit with the same name at www.tvrepairworld.com the kit contains the capacitors and the CD with detailed instructions.

Trying installing a new power supply. This is the main problem with tv's with the issue. But if you just bought it I would try to get my money back from where I bought it from. Installing a power supply for a tv is not that hard at all.

Is the convergence adjustment option still listed on the on screen menu or has it disappeared? Thats a very easy chassis to repair so let me know if the option has disappeared or not and I can asssist you with how to fix it.

you can get the parts you need at the following link
http://servicemanuals.vstore.ca/